Hello, Are you trying to use a universal remote to control your Hisense TV, but don’t know the Hisense TV universal remote codes? Look no further! In this article, we will provide a list of the most common Hisense TV universal remote codes and give you step-by-step instructions on how to program your universal remote to work with your Hisense TV. So, keep reading!
Hisense TV Universal Remote Codes List
Here is a list of the most common 3, 4, and 5 digit Hisense TV universal remote codes:
Hisense TV Universal Remote 3 Digit Codes
- 759
Hisense TV Universal Remote 4 Digit Codes
| 0073 | 0182 |
| 0216 | 0848 |
| 0208 | 0009 |
| 0145 | 0156 |
| 0227 | 0508 |
| 0696 | 0748 |
| 0753 | 0821 |
| 1170 | 0780 |
Hisense TV Universal Remote 5 Digit Codes
| 12183 | 10748 |
| 11758 |
How To Connect Universal Remote To Hisense TV?
If you want to know how to connect a universal remote to your Hisense TV, there are a few different methods you can try:
- Use the code search method
- Manually input the code
- Use the Auto Search method
How To Program Hisense TV With Universal Remote Using The Code Search Method
If you couldn’t find the key code which works for the device at that time, you can force your universal remote into search mode to find the correct one. The code is usually located in the manual, and forcing the remote into search mode will allow it to scan through all of the codes until it finds the one that works for your device.
- Turn on your Hisense TV.
- Press and hold the “Setup” button on your universal remote until the button blinks twice.
- Enter the code 991 into your remote. The button should blink twice again.
- Press and release the “Power” button on your remote.
- Point the remote at your Hisense TV and press and hold the “Channel Up” button until your TV turns off. Release the button and press it again once, then release it a second time (this is known as a double-press).
- Your TV is now programmed to work with your universal remote!
How to Program Hisense TV Universal Remote With Manual Method
- First, turn the Hisense TV on.
- Press the device (TV, Blu-ray, CBL-SAT, etc) button on your remote.
- Press and hold the SETUP button on your universal remote until the red light flashes.
- Now enter the Hisense TV Universal Remote Code for that device. After entering the code red light will turn off.
- Once you have entered the code, now point the remote to the device and try testing it by using different buttons.
How to Program Hisense TV Universal Remote Without Codes
In this method, your universal remote automatically scans for the code. It scans one code at a time to find the correct one.
- First, turn the Hisense TV on.
- Press the device (TV, Blu-ray, CBL-SAT, etc) button on your remote.
- Press and hold the SETUP button on your universal remote until the red light flashes.
- Now enter the Hisense TV Universal Remote Code for that device. After entering the code red light will turn off.
- Once you have entered the code, now point the remote to the device and try testing it by using different buttons.
Troubleshooting
If you are having trouble programming your universal remote to control your Hisense TV, there are a few troubleshooting steps you can try:
- Double check that you are using the correct codes for your specific Hisense TV model. The codes provided above are for general use, but may not work for all models.
- Make sure that the batteries in your universal remote are fresh and properly installed. Weak or dead batteries can prevent the remote from sending signals to your TV.
- Try resetting your universal remote by removing the batteries and then reinserting them. This can sometimes clear any stored codes and allow you to start the programming process again.
- If you still have issues, you can contact the manufacturer of your universal remote for additional support, or check the user manual of your Hisense TV for additional troubleshooting steps.
Final Words
In conclusion, using a universal remote to control your Hisense TV can simplify your TV viewing experience by reducing the number of remote controls you need to use. The codes provided above are a starting point, but may not work for all Hisense TV models. With the right code and proper setup, you should be able to control your Hisense TV with ease using your universal remote.
Can all tvs use a universal remote?
A universal remote works with practically all TVs. For instance, the Logitech Harmony remote controls work with 270,000 products from 6,000 different companies.
Why is my universal remote not connecting to my TV?
Recharge the remote control’s batteries. Check to see if the device’s Infrared (IR) sensor is blocked. To activate the product, press the relevant function button on the remote control or slide the switch in the appropriate direction. At various distances from the product, try using the remote control.
How do I reset a universal remote?
Press a button to completely discharge the remote after removing a battery. Replacing the battery should cause the LED to blink twice. Within 6 seconds, concurrently press the numbers 2 and 8; the LED should then flicker twice. The LED will flicker four times when you enter the code 9 8 1.