Cable Box And SAT Universal Remote Codes | Updated 2023

Cable Box And SAT Universal Remote Codes

In today’s interconnected world, the convenience of having a universal remote control cannot be overstated. It’s the magic wand that brings all your entertainment devices under one command, saving you from the hassle of managing multiple remotes. But when it comes to programming these remotes for your cable box or satellite receiver, it can often feel like deciphering a secret code. That’s where this blog comes in.

We’re here to demystify the world of cable box and satellite universal remote codes, making it easier than ever for you to take control of your entertainment system and enjoy seamless viewing experiences. Whether you’re a tech-savvy enthusiast or just looking to simplify your entertainment setup, join us as we explore the ins and outs of remote codes and unlock a world of convenience at your fingertips.

Cable Box And SAT Universal Remote Codes List

Brand NameCable Box Codes
ADELPHIA0512, 0511
ALLEGRO0524, 0525
AMERICAST0527
ANTRONIX0468, 0469

ARCHER0468, 0469, 0470, 0471
AT&T0511
BELL SOUTH0527
CABLETENNA0468
CABLEVIEW0468
CABLEVISION0506
CENTURY0471
CITIZEN0471
COGECO0511
COLOR VOICE0472, 0473
COMCAST0511
COMTRONICS0474, 0475
CONTEC0476
COX0471
DIGITAL MUSIC EXPRESS0514
EASTERN0477
EVERQUEST0474
GARRARD0471
GC ELECTRONICS0469
GEMINI0536, 0479
GE0549
GENERAL INSTRUMENT0509, 0461, 0465
HAMLIN0461, 0480, 0481, 0482
HITACHI0463
ILLICO0506
JASCO0471
JERROLD0509, 0461, 0465, 0518
MAGNAVOX0485
MEMOREX0486
MOTOROLA (COX)0509, 0465, 0513, 0518
MOVIE TIME0487
NSC0487
OAK0476, 0489
PACE0532
PANASONIC0460, 0508
PARAGON0486, 0488
PHILIPS0471, 0479, 0485, 0490, 0491, 0492
PHILIPS MAGNAVOX0505, 0534
PIONEER0478, 0506, 0493, 0494
PULSAR0486
RADIO SHACK0505, 0534, 0525
RCA0460, 0471, 0507
REALISTIC0469
REGAL0482
REGENCY0477
REMBRANDT0463
ROGERS0506
RUNCO0486
SAMSUNG0474, 0494
SCIENTIFIC ATLANTA0498, 0497, 0506, 0535, 0512, 0466, 0496
SHAW0511
SIGNAL0474
SIGNATURE0463
SL MARX0474
SPRUCER0460
STANDARD0499
STARCOM0461, 0518
STARGATE0474
STAR SIGHT0507
STAR TRAK0516
TANDY0500
TELEVIEW0474
TEXSCAN0499
TIME WARNER0506
TOCOM0464, 0501, 0513, 0520
TOSHIBA0486
TV860487
UNIKA0468, 0469, 0471
UNITED0461
UNIVERSAL0468, 0469, 0470, 0471, 0502, 0524
VIDEOWAY0504
VIEWSTAR0475, 0485, 0487, 0500
VIDEO TECH0550
VIDEOTRON0506
ZENITH0503, 0525, 0471, 0486, 0521, 0522, 0523, 0527

How To Program Cable Box & SAT Universal Remote?

A universal remote can be set up or configured in three easy ways:

  • Using a keycode
  • Programming using a universal remote code search
  • Manual setup

How to Program Cable Box & SAT Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to find the correct remote code that works with your remote. Follow the instructions below:

  • Turn on the smart device you want to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is ready to program, according to the LED light.
  • Use the remote to select the “CH+” and “CH-“ switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  • Click the “power” key to confirm the code. The system should start up. If it does, try a different channel to ensure the remote is configured properly.

To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

Read Also: jvc-dvd-player-universal-remote-codes/

How to Program Cable Box And SAT Universal Remote With Manual Method

The universal remote may be readily programmed using the keycode, which also helps to identify the make and model of your device.

You must “Turn The Device On” first.

  • Press the “TV” button on your “Cable Box & SAT universal remote”
  • As soon as the universal remote displays the “Light Flash” (a sign that it is in “Learning mode”), push and hold the “Setup button” for a few seconds.
  • Finally, enter the “Keycode” that you received from the Instructions Booklet for programming.
  • Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  • When the screen switches off you can release the “Power Button”.

That’s all there is to it; your TV should now work perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.

  • “Turn The Device On”.
  • Hold down the “Setup” button for a moment.
  • Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case your TV, “Turns Off.”

Finding your key code may take some more time using the above method, but it is very crucial. Your remote should function properly for all in-room functions once you have completed the previously mentioned steps.

Troubleshooting Tips


Of course, here are some troubleshooting tips to help you navigate common issues when dealing with cable box and satellite universal remote codes:

  1. Check Batteries: Before diving into complex troubleshooting, start with the basics. Ensure that the batteries in your universal remote are fresh and properly inserted. Weak batteries can lead to intermittent connectivity issues.
  2. Line of Sight: Ensure there is a clear line of sight between the remote and the cable box or satellite receiver. Obstructions like furniture or other devices can hinder the remote’s signal from reaching its intended target.
  3. Reposition the Device: If you’re having trouble with the remote’s signals reaching your cable box or satellite receiver, try repositioning the device. Sometimes a slight adjustment in placement can make a significant difference in signal reception.
  4. Reprogramming the Remote: If the remote is not responding to your cable box or satellite receiver, it might need to be reprogrammed. Consult your remote’s manual or the manufacturer’s website for step-by-step instructions on how to reprogram it.
  5. Correct Device Selection: Ensure that you’ve selected the correct device mode on your universal remote. If you want to control your cable box, make sure the remote is set to the cable box mode and vice versa for satellite.
  6. Code Entry: If the remote isn’t functioning correctly despite correct device selection, you might need to enter the correct remote codes for your cable box or satellite receiver. Refer to the user manual that came with your universal remote for a list of codes or visit the manufacturer’s website for an updated code database.
  7. Code Testing: While trying different codes, use the “code testing” method. Enter a code and test whether the remote successfully controls your device. If not, try the next code until you find the one that works.
  8. Factory Reset: If all else fails, consider performing a factory reset on your universal remote. This will reset all settings and codes to their default values. Refer to the user manual for specific instructions on how to perform a factory reset.
  9. Check for Interference: Wireless devices, such as routers and cordless phones, can sometimes interfere with the signal between your universal remote and your cable box or satellite receiver. Try temporarily turning off or relocating these devices to see if it improves remote performance.
  10. Contact Customer Support: If you’ve exhausted all troubleshooting options and your universal remote still isn’t working as expected, don’t hesitate to contact the manufacturer’s customer support for further assistance. They might provide additional guidance or offer a replacement if necessary.

By following these troubleshooting tips, you’ll be better equipped to resolve common issues and get your universal remote working seamlessly with your cable box or satellite receiver

Conclusion

Now that the article is over, I hope you can effectively control your Cable Box And SAT Universal Remote Codes. And I have no doubt that you will be able to do anything.

FAQs

Can you program a universal remote to a cable box?

Your cable boxes may be configured with a universal remote control for smooth operation and functionality. In actuality, using the universal remote control with your cable box just requires adding a few particular codes

Can any remote be used with a cable box?

The majority of universal remote controls can operate numerous devices, including your TV, cable box, and other additional devices like a DVD player and a streaming device.

Leave a Comment