Programming Cybertec Universal Remote Codes | Updated 2024

Programming Cybertec Universal Remote Codes

Hey! Are you searching for Cybertec Universal Remote Codes for your Universal Remote Control? then you have approached the right post. On this web page, we have various different codes for your devices like TV, DVD players, Sound boxes, and Blu-Ray players. You can scroll down the list of remote codes to find the 3-digit and 4-digit codes of remotes like rm-8in1, rm-l1107+3, and many others.

Below we have listed all the Cybertec Universal Remote Codes for All Devices. And all the provided codes are fully tested by our technical team and we are sure about them. So, just go and find the code for your device and we have also provided you with the method of how to program your Cybertec remote control with a TV or any other device.

Cybertec Universal Remote Codes for All Devices

As you are already aware there are various brands of universal remotes like Cybertec, Chunghop, Avera, and many others. However, you will get the Cybertec Universal Remote Control Codes List here on this page.

If you have another universal remote and want a remote code for it then you can check a list of codes by other Universal Remotes.

Cybertec Universal Remote Codes List

First of all, we are going to provide the list of universal remote codes and then we will be explaining the best methods to program with your universal remote.

Cybertec rm 8 in 1 & rm-l1107+3 Universal Remote 3 Digit Codes

018050
378040
063039
375037
092033
023021
123025
018024
008099
099051
011049
113091

Cybertec rm 8 in 1 & rm-l1107+3 Universal Remote 4 Digit Codes

00941332
10311205
01901313
01541414
10751717
10651515
17331827
10811829
11141164
10731333
10991191
10951743
11661268
12641646
11121456

How To Program Cybertec Universal Remote With My Device?

Universal Remote Codes are actually used to program your favorite remote with different devices. For this purpose, we just require the code of the universal remote control and knowledge of the process for programming the remote. And then we are done.
Additionally, there are three ways to program the Cybertec universal remote with all appliances, whether it be a TV or any other device.

Program Cybertec Universal Remote With A Code

  1. Turn your device On.
  2. Find the Setup key.
  3. Press TV or the device you are dealing with. The LED light indicates the device is ready to program.
  4. Now, it will ask you to enter the code of your device.
  5. Enter the code that you have found from the above-mentioned list.
  6. Verify the code by clicking on the power key. The device should turn on.
  7. It is done. Enjoy!
  1. Above all, turn the device On.
  2. Then, look for the device code you want to control.
  3. Now press and hold the Setup button.
  4. Finally, enter the Code.
  5. Now hold down the Power Button on your universal remote.
  6. Hold it until the device turns off.
  7. Your device is all set and your remote should be working with your device smoothly.

Program Cybertec Universal Remote With Manual Method

  1. This method also requires turning the device On first.
  2. Press the device button on your remote and select the device from the devices category.
  3. Now press and hold the Setup button of the remote until its Light starts to flash.
  4. Finally, enter the Keycode which you collected from the Instructions Booklet.
  5. Then, point your remote at your device and then Press And Hold The Power button.
  6. Your device should turn On.
  7. Once you have done the above procedure your remote should be working for all the functions

Conclusion

If your TV remote has ceased working, the Cybertec universal remote is a good option. Because it is an 8-in-1 remote, you can connect it to up to 8 devices at once. It allows you to control TV, soundbar, streaming players, DVD, and other devices with a single remote, doing away with the need to use a different remote for each device. To accurately program the remote to the appropriate device, follow the instructions and provided codes.

Leave a Comment