DVD Universal Remote 4 Digit Codes | Updated 2023

DVD Universal Remote 4 Digit Codes

Welcome to our blog, where we delve into the exciting realm of entertainment and technology! In a world where convenience and simplicity are paramount, one of the most integral aspects is the ability to control our devices seamlessly. Whether it’s enjoying a movie night with a DVD player or navigating through streaming platforms, the right tools can make all the difference.

Join us as we explore the universe of universal remote codes—those magical combinations that bridge the gap between different devices and remotes. Uncover the secrets to programming your remote effortlessly and gain mastery over your entertainment setup. Let’s embark on a journey to unlock a new level of convenience and control in the way we interact with our devices.

DVD Universal Remote Codes, 4 Digit

Apex0386, 0390, 0391
B & K0978
Broksonic0932, 0967, 0394
Centrios0951, 1067, 1068, 0921
Classic0431, 1051, 0401
Coby0926, 0946, 0947, 0916, 0445
Cyberhome0393, 0985, 0939
Cytron0446, 0388
Daewoo0440, 0441, 0444, 0971, 0965
Denon0400, 0421
Dual0447, 0984, 0956, 0428, 0446
Durabrand0449, 0405, 0446
Dvd 20000402
Elta0434, 0435
Emerson0405, 0940, 0899, 0456, 0458
Funai0456, 0458
GE0409, 0430
Go-video0431, 0937, 0971, 0454, 0902
Gpx0936, 0944
Harman Kardon0427
Hitachi0404, 0407, 0428, 0419
Ilo0959, 1070
Insignia0405, 0456, 0921, 0430, 0905
Initial0430, 1070
Jvc0406, 0964, 0900, 1072
Jwin0390, 0893, 0895
Kenwood0400, 0429
Klh0430, 0906, 0386
Konka0410, 0411, 0412
Koss0415, 0388
Lasonic0451, 0948
Lenoxx0931, 0435
LG0405, 0972, 0907
Magnavox0398, 0408, 0979, 0981, 0980
Marantz0398, 0405, 0408, 0423, 0981
Memorex0446, 1050
Onkyo0422, 0975
Panasonic0396, 0400, 0974, 0970
Philips0398, 0408, 0423, 0755, 0979, 0981
Pioneer0403, 0404, 0976, 0977
Polaroid0385, 0957, 0949
Polk0398, 0408, 0981
Proscan0409, 0890
Radio Shack0449, 0453, 0919, 0920
RCA0409, 0430, 0449, 0453, 0920, 0890
Samsung0407, 0454, 0942, 0963, 0891, 0455
Sansui0394, 0967
Sanyo0904, 0416
Selectron1077, 1078, 1079
Sharp0397, 0897, 0908
Sony0987, 0988, 0989, 0399, 0986, 0389
Sylvania0456, 0458
Teac0404, 0449
Techwood0433, 1071
Tevion0388, 0446, 0447, 0448, 0450, 0451, 0452
Tivo0912, 0909
Toshiba0394, 0398, 0973, 0924, 0983
Yamaha0400, 0420, 0979, 0980, 0408
Zenith = 0405 0907
Zenit0405, 0907

How to Program DVD Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto-search process. To program the control, it scans one code at a time to find the right remote code that works with your remote. Follow the instructions below:

  • Turn on the smart device you want to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is ready to program, according to the LED light.
  • Use the remote to choose the “CH+” and “CH-” switches.
  • On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  • Click the “power” key to confirm the code. It should start up. If it does, check a different channel to ensure the remote is programmed properly.
  • To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was saved.

How to Program DVD Universal Remote With Manual Method

The universal remote may be easily programmed using the keycode, which also helps to identify the make and model of your device.

  • You must “Turn The Device On” first.
  • Press the “DVD universal remote” to “TV” mode.
  • As soon as the universal remote displays the “Light Flash” (a sign that it is in “Learning mode”), press and hold the “Setup button” for a few seconds.
  • Finally, enter the “Keycode” that you have collected from the Instructions Booklet for programming.
  • Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  • When the screen switches off, you can release the “Power Button”

That’s all there is to it; your TV should now work perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

  • You can put your universal remote to search mode and look for the right key code if you are unable to find it at that moment. The remote control is forced into search mode by a code in the instructions.
  • “Turn The Device On” first.
  • Hold down the “Setup” button for a moment.
  • Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”

Finding your key code may take some extra time using the above-mentioned method, but it is very important. Your remote should function properly for all in-room functions once you have completed the above steps.


If you have found a remote code that works with your DVD, please use the comment form below and tell us and all our readers which remote code worked for which device. Your help will be much appreciated!

Troubleshooting Tips

Troubleshooting Tips: Mastering Your Entertainment System

  1. Remote Woes? Check Batteries and Line of Sight: If your remote seems unresponsive, start by swapping out the batteries. Additionally, ensure there are no obstacles blocking the remote’s signal path to the device.
  2. Code Conundrum? Verify Universal Remote Codes: When programming your universal remote, double-check that you’re using the correct 4-digit code for your DVD player. An incorrect code can lead to functionality issues.
  3. Cable Connections Matter: Sometimes, no picture or sound might be due to loose or incorrect cable connections. Make sure all cables are securely plugged in and the correct input source is selected on your TV.
  4. Firmware Updates for Enhanced Performance: Check if your DVD player has any available firmware updates. Installing these updates can resolve bugs and enhance overall performance.
  5. Pesky Disc Problems? Clean and Inspect: If discs aren’t playing smoothly, they might be dirty or scratched. Gently clean the disc’s surface and inspect it for major scratches before trying again.
  6. Freezing Playback? Give it a Break: If playback freezes, give the DVD player a moment to catch up. Pause or stop the playback for a few seconds before resuming – this often resolves minor glitches.
  7. Audio-Video Sync Hiccups? Adjust Settings: Should you encounter issues with audio and video synchronization, explore your DVD player’s audio settings and make necessary adjustments for better alignment.
  8. Reset as a Last Resort: When all else fails, consider a factory reset. Refer to your device manual for the proper procedure, as this will reset settings to default and can resolve stubborn issues.
  9. User Manual is Your Friend: Whenever troubleshooting, consult your DVD player’s user manual. It’s a treasure trove of information, guiding you through specific issues and solutions.
  10. Seek Professional Help When Necessary: If persistent problems persist despite your efforts, it might be time to reach out to technical support or a professional for expert assistance.


How to program a universal remote to a DVD player without codes?

You must follow these steps to program your universal remote without a code: Hold down the SET and Zero (0) buttons on your universal remote control four times at once. This important phase is where most individuals fall short. The LED light indication will then gradually begin to turn on and is typically red.

How do I play a DVD with a remote?

To change the input settings, use the TV remote control.
Look for a “input” button on your remote if you plan to use your DVD player with a television. To change the input on your DVD player to the correct one, press this button a few times.

Leave a Comment