Hey, Are you wondering about How To Program A Monster Remote? OR are you looking for the codes to program your monster remote? Don’t worry. Fortunately, here we have mentioned a few simple steps you can follow to program your monster remote and start enjoying seamless control over your home entertainment system.
In this article, we will guide you through the process of programming a monster remote and provide codes and tips to help you make the most out of your new device.
Monster Universal Remote Codes
| BRAND | CODES |
| AOC | 0018, 0115, 0174, 0233 |
| APEX | 0460 |
| Audiosonic | 0036, 0236, 0160, 0428, 0036, 0132, 0016 |
| Bell & Howell | 0244, 0308, 0240, 0146, 0018, 0279 |
| Bush | 0095, 0373, 0392, 0023, 0216, 0411, 0416 |
| Citizen | 0018, 0071, 0174, 0381 |
| Changhong | 0282, 0283, 0293, 0244, 0323, 0259 |
| Curtis Mathes | 0018, 0144, 0142, 0300, 0303, 0381, 0395 |
| Daewoo | 0019, 0132, 0369, 0285, 0060, 0236, 0117, 0127 |
| Daytron | 0049, 0089 |
| Duraband | 0440, 0310, 0422, 0287, 0434, 0254, 0378, 0372 |
| Dynex | 0145, 0377, 0370, 0177, 0180, 0060, 0174 |
| Emerson | 0233, 0252, 0080, 0180, 0142, 0411, 0370 |
| Envision | 0206, 0242, 0080, 0018, 0344, 0240, 0369 |
| Ferguson | 0319, 0079, 0009, 0368, 0453, 0077, 0280 |
| Funai | 0132, 0188, 0388, 0379, 0370, 0389, 0142, 0209, 0132 |
| Gateway | 0023, 0080, 0060, 0277, 0380, 0411, 0251 |
| GE | 0380, 0277, 0317, 0293, 0297, 0262, 0266, 0268 |
| Goldstar | 0055, 0175, 0262, 0381, 0240, 0118, 0080, 0070 |
| Haier | 0217, 0007, 0395, 0005, 0019, 0069, 0392 |
| Hisense | 0334, 0331, 0296, 0392, 0125, 0075, 0003 |
| Hitachi | 0240, 0247, 0278, 0023, 0121, 0180, 0023, 0060 |
| Ilo | 0411, 0055, 0158, 0132, 0369, 0045, 0018 |
| Insignia | 0369, 0125, 0416, 0038, 0307, 0085, 0240 |
| JBL | 0018 |
| JCPenney | 0305, 0029, 0303, 0247, 0360, 0441, 0224 |
| Jensen | 0420, 0150, 0369, 0411, 0423, 0244, 0034, 0032 |
| JVC | 0017, 0137, 0308, 0013, 0214, 0300, 0219, 0235 |
| Konka | 0166, 0444, 0402, 0240, 0369, 0161, 0449, 0308, 0163 |
| LG | 0146, 0240, 0018, 0423, 0236, 0432, 0441, 0308 |
| Magnavox | 0083, 0182, 0076, 0240, 0369, 0142, 0018 |
| Matsui | 0118, 0023, 0060, 0426, 0373, 0231, 0351, 0334 |
| Memorex | 0132, 0327, 0269, 0370, 0381, 0133, 0329 |
| Mitsubishi | 0303, 0018, 0142, 0240, 0300, 0132, 0138 |
| NEC | 0233, 0283, 0320, 0132, 0231, 0235, 0428, 0138 |
| Olevia | 0061, 0298, 0165, 0240, 0321, 0389, 0194 |
| ONN | 0009, 0380, 0209, 0280, 0132, 0018, 0165 |
| Optimus | 0333, 0252, 0369, 0291, 0428, 0360, 0351, 0131 |
| Panasonic | 0295, 0240, 0084, 0023, 0275, 0411, 0166, 0160 |
| Philips | 0294, 0206, 0142, 0368, 0206, 0011, 0416, 0291 |
| Philco | 0099, 0085, 0291, 0444, 0251, 0090, 0240, 0080, 0132 |
| Pioneer | 0019, 0355, 0422, 0080, 0280, 0262, 0320, 0416 |
| Polaroid | 0017, 0018 |
| Proscan | 0278, 0375, 0045, 0372, 0359, 0240, 0346, 0080 |
| Proton | 0174, 0175, 0327, 0433, 0132 |
| Quasar | 0269, 0275, 0085 |
| Radio Shack | 0369, 0174, 0240 |
| RCA | 0319, 0326, 0300, 0437, 0381, 0274 |
| Realistic | 0327 |
| Roku | 0291, 0293, 0283, 0439 |
| Samsung | 0132, 0018, 0080, 0327, 0411, 0498, 0052, 0428 |
| Sansui | 0133, 0120, 0174, 0116, 0240, 0381, 0018 |
| Sanyo | 0164, 0303, 0071, 0025, 0423, 0441, 0128, 0411 |
| Scepter | 0083, 0071, 0081, 0293, 0442 |
| Sharp | 0245, 0259, 0245, 0250, 0235, 0314, 0142, 0260 |
| Sky | 0327, 0369, 0240 |
| Sony | 0320, 0313, 0142, 0180, 0140, 0231, 0144 |
| Soundesign | 0175, 0285, 0240, 0160, 0174, 0327, 0180 |
| Sylvania | 0129, 0018 |
| TCL | 0174, 0075, 0322, 0428, 0188, 0192, 0196 |
| Teknika | 0234, 0092, 0238 |
| Toshiba | 0235, 0262, 0381, 0004, 0014, 0041, 0351 |
| Vizio | 0137, 0058, 0094 |
| Wards | 0018 |
| Westinghouse | 0387, 0358 |
| Yamaha | 0257 |
| Zenith | 0180, 0018 |
How To Program A Monster Remote By Manual Method
Programming a monster remote may seem intimidating, but it can be a straightforward process if you follow these simple steps:
- First, determine the code for your devices from the above mentioned list.
- Make sure all of the devices you want to control with your monster remote are turned on.
- Press and hold the button for the device you want to program on the monster remote. For example, if you want to program your TV, press and hold the TV button on the remote.
- While still holding down the device button, enter the code for your device. The device button will flash to indicate that it has received the code.
- Once you’ve entered the code, test the remote by pressing the power button. If your device turns off, the programming was successful. If not, try entering a different code and testing again.
- Repeat these steps for each device you want to program on your monster remote.
Read Also: Momentum Universal Remote Codes
How To Program A Monster Remote By Auto Search Method
- Turn on your device and the universal remote you want to program.
- Press and hold the “TV” button on your remote until it lights up.
- Press and hold the “Setup” button on your remote until the “TV” button blinks twice.
- Press the “Power” button on your remote and then press the “Up” or “Down” button repeatedly until your TV turns off.
- Press the “Setup” button to lock in the code. The “TV” button should blink twice.
- Test the remote to see if it works with your TV. Try turning the TV on and off, changing channels, and adjusting the volume.
- If the remote does not work with your TV, repeat the process from step 2 and try the next code.
Conclusion
Programming a monster remote may seem daunting, but by following the steps outlined in this article, you can easily know how to program a monster remote and simplify the operation of your home entertainment system.
With a little practice, you can enjoy the convenience of consolidated control over all of your devices with your new monster remote.
FAQ’s
How do I program my monster remote?
Simply disconnect and re-plug LED light strips or lamps into power to pair them with another remote. Next, within five seconds of connecting them back in, press and hold the “Speed+” button until the lights begin to blink three times.
How do I reset my Monster Smart LED strip?
If you need to reset your Multicolor LED Light or change the setup, simply hold down the controller button for 5-10 seconds to reconnect the device.
How do I program a universal remote without a code?
Hold down the Power button as well as the button for the object you want your remote set up for. When instructed, let go of both buttons. You can release the button and the Power button once the LED light on your remote control turns on and stays on. Aim your remote control at the object you wish to set it up for.