How To Program an Onn Universal Remote To the TV

Have you recently purchased an Onn Universal Remote, but don’t know how to program it? Don’t worry – this article will show you how to easily program your remote so that you can start using it with your TV. With Onn Universal Remotes, you can now easily control all your devices with just one remote! 

I’ll go over the different methods of programming, as well as tips on troubleshooting any issues that might arise. So keep reading to learn how to make the most out of your new Onn Universal Remote!

Programming Methods of Onn Universal Remote

Programming With Remote Codes

To program an ONN universal remote to your TV, you will need to follow these steps:

1. Find the code for your TV brand in the ONN universal remote’s code list. You can usually find this list in the manual that came with the remote, or you can search online for the code list.
2. Then, turn the device on, in this case, Turn your TV On.
3. Press and hold the “Program” button on the ONN universal remote until the indicator light turns on.
4. Press and release the “TV” button on the ONN universal remote. The indicator light should flash once.
5. Enter the code for your TV brand using the number buttons on the ONN universal remote. The indicator light should flash once again to confirm that the code has been accepted.
6. Press the “Power” button on the ONN universal remote. If the TV turns off, the programming was successful.

If the TV does not turn off, try entering a different code from the code list. Repeat the process until the TV turns off, indicating that the correct code has been entered. Test the other buttons on the ONN universal remote to make sure they are functioning properly.

Programming With Auto Search

To program an ONN universal remote to your TV using the auto search method, you will need to follow these steps:

1. Press and hold the “Power” button on the ONN universal remote until the indicator light turns on.
2. Press and release the “TV” button on the ONN universal remote. The indicator light should flash once.
3. Press and release the “Power” button on the ONN universal remote. The indicator light should flash again.
4. Point the ONN universal remote at the TV and press and release the “Volume Up” button repeatedly until the TV turns off. This indicates that the correct code has been found.
5. Press the “Enter” button on the ONN universal remote to save the code. The indicator light should flash once to confirm that the code has been saved.
6. Test the other buttons on the ONN universal remote to make sure they are functioning properly.

Troubleshooting Tips

If you’re having trouble programming your Onn Universal Remote to the TV, here are some troubleshooting tips:

1. Make sure that the batteries in the remote are fresh and have enough power.
2. Ensure that you’re pointing the remote directly at the TV.
3. Try different codes for your TV brand until you find one that works.
4. If all else fails, consult the Onn Universal Remote manual for more instructions.

Conclusion

Programming an Onn universal remote to the TV is a simple process that can be completed with just a few steps. With this, you don’t have to go through the hassle of keeping track of several remotes for different devices. All in all, programming your Onn Universal Remote will make it easier and more convenient for you to watch television from one single device.

FAQs