How To Program Emerson Remote: Complete Guide

Are you having difficulty programming your Emerson remote? Don’t worry, we’ve got you covered. In this article, we’ll discuss the various methods of programming an Emerson remote, as well as provide tips on getting it up and running quickly and easily. Read on to find out how to program your Emerson remote in no time!

Steps Of Programming Emerson Remote

To program an Emerson remote, you will need to follow these steps:

  1. Locate the code list for your Emerson remote. This list can be found in the user manual that came with the remote or online at the manufacturer’s website.
  2. Turn on the device you want to control (e.g., TV, DVD player, cable box).
  3. Press and hold the “Setup” button on the Emerson remote until the “TV” button blinks twice.
  4. Using the keypad on the remote, enter the code for your device from the code list.
  5. Press the “Power” button on the remote. If the device turns off, the code was accepted and programming is complete. If the device does not turn off, try entering a different code from the code list.

Use the Code Search Button Instead

If none of the codes listed in the code list work, you may be able to find the correct code using the “Code Search” function on the remote. To use this function, follow these steps:

  1. Press and hold the “Setup” button until the “TV” button blinks twice.
  2. Press the “Power” button on the remote. The “TV” button will blink twice to indicate that the Code Search function has been activated.
  3. Press the “Power” button again to begin the Code Search. The “TV” button will blink once every time a new code is tried.
  4. When the device turns off, the correct code has been found. Press the “Setup” button to save the code and exit the Code Search function.

How To Find Right Codes For Emerson Remote?

To find the right codes for your Emerson remote, you can try the following steps:

  1. Check the user manual: The codes for your Emerson remote should be listed in the user manual that came with the remote. The manual should have a section with a list of codes that can be used to program the remote to control various devices.
  2. Search the manufacturer’s website: If you no longer have the manual or if you need additional codes, you can often find them on the manufacturer’s website. To find the codes on the website, you may need to enter the model number of your Emerson remote.
  3. Use the “Code Search” function: If you are unable to find the codes you need in the manual or on the manufacturer’s website, you may be able to use the “Code Search” function on the remote to find the correct code for your device.

What I Can Do with Emerson Remote?

An Emerson remote is a device that allows you to control various electronic devices from a single device. Some common devices that can be controlled with an Emerson remote include:

  • TV
  • DVD player
  • Cable box
  • Satellite receiver
  • Home theater system

With an Emerson remote, you can perform a wide range of actions, including:

  • Turning the device on or off
  • Changing the channel or input
  • Adjusting the volume
  • Playing, pausing, or skipping media
  • Accessing menu options

In addition to these basic functions, some Emerson remotes also offer advanced features such as a built-in keyboard, a touch screen, or the ability to control multiple devices at once. The specific features of your Emerson remote will depend on the model you have.

Troubleshooting Directions

If your Emerson remote is not functioning properly, there are a few steps you can try to troubleshoot the issue:

  • Check the batteries: Make sure that the batteries in the remote are not dead or low. If the batteries are low, replace them with new ones.
  • Check the device: Make sure that the device you are trying to control (e.g., TV, DVD player, cable box) is turned on and that the remote is set to the correct device mode.
  • Check the remote’s range: The remote may not work if it is too far away from the device you are trying to control. Try moving closer to the device to see if the remote begins to work.
  • Check for interference: Remote signals can be disrupted by other electronic devices or by walls and other obstacles. Try moving the remote and the device closer together to see if this improves performance.
  • Reset the remote: If none of the above steps resolve the issue, you may need to reset the remote. To reset the remote, follow these steps:
  • a. Press and hold the “Setup” button until the “TV” button blinks twice.
  • b. Press the “9-9-1” buttons on the keypad. The “TV” button will blink twice to indicate that the remote has been reset.


Programming your Emerson remote is a straightforward process that can be done in minutes. By following the simple steps outlined in this guide, you will have your remote up and running quickly and easily.

With the right code, you’ll be able to access all of the features and functions available on your device such as controlling volume, changing channels, accessing special functions, and more. If you ever run into any issues while programming your Emerson remote or need help finding codes, don’t hesitate to contact customer support for assistance.


Why won’t my universal remote control from Emerson work?

The most frequent causes of remote malfunctions are incorrect remote programming, blocked infrared communications between the TV and the remote, and low batteries.

How do I make my Emerson remote work properly?

If you’re using a universal remote, you must first program it with the above codes. If you have an Emerson huge universal remote control, you can use it right away after installing the batteries.

Leave a Comment