How To Program RCA Remote To Emerson TV

Hey, What’s going on? Are you having trouble getting Program RCA Remote To Emerson TV? Programming an RCA remote to an Emerson TV can seem like a daunting task, but, don’t worry, with the right steps, it can be a quick and easy process. In this guide, we’ll walk you through the simple steps on how to Program RCA Remote To Emerson TV.

You just need to follow the steps outlined below and you’ll be able to use your RCA remote to turn your Emerson TV on and off, adjust the volume, and more and you can start enjoying your favorite shows and movies with ease.

How To Program RCA Remote To Emerson TV
How To Program RCA Remote To Emerson TV

Program RCA Remote To Emerson TV With Auto Search Method

To program your universal remote to your Emerson TV using the auto search method, follow these steps:

  1. First, turn On your Emerson TV.
  2. Turn On the remote and tap the device button (TV, DVD, Soundbar, etc) for 3 seconds.
  3. Now point the remote to the device and press CH+ and CH- buttons continuously until your device turns Off.
  4. Verify the code by pressing the Power button. Your device should turn on.
  5. Now test your device and tap the device button to save the code.

Read More: RCA Universal Remote Codes For All Devices

Programming RCA Remote To Emerson TV With Manual Method

  • First, turn the Emerson TV on.
  • Press the device (TV, Blu-ray, CBL-SAT, etc) button on your remote.
  • Press and hold the SETUP button on your universal remote until the red light flashes.
  • Now enter the RCA Universal Remote Code for that device. After entering the code red light will turn off.
  • Once you have entered the code, now point the remote to the device and try testing it by using different buttons.

That’s it. Your Universal remote is successfully programmed with your device. If not, try repeating the procedure by using different codes from the same reference table.

Retrieving the Code for your Device

n order to program your Innovate Jumbo Universal Remote Control, you will need to retrieve the code for your device. Our website has a comprehensive list of codes for different types of TVs. Once you find the code for your device, you will need to program it into your universal remote. For this, follow the easy steps mentioned above.

You can also check the remote code for your device by using owner’s manual. Once you have the code, programming your remote is a breeze! Just follow the instructions that came with your remote control and you’ll have it programmed in no time.

Final Words

I hope these instructions were helpful in programming your RCA universal remote to work with your Emerson TV. If you have any questions or need further assistance, don’t hesitate to ask. You can also consult the instruction manual for your RCA universal remote for more information and troubleshooting tips. Happy viewing!


How do I program a RCA universal remote to my TV with code?

With the RCA Remote Code Finder, locate the code for your device. Point your remote control at the gadget you want to control after turning it on. The remote’s button for your device must be pressed and held. Press and type your device code.

Why won’t my RCA remote connect to my TV?

Restart the remote. To reset the remote’s microprocessor, remove the batteries and then press and hold the number 1 key for a few seconds. Reinstall the batteries, push the ON/OFF key, and then release the number 1 key. If it comes on, try again after reprogramming the remote.

Leave a Comment