The Time Warner remote control is a powerful tool that can transform your television-watching experience. Whether you’re a fan of movies, sports, or your favourite TV shows, having a single remote to command it all can make life a whole lot easier. However, getting your Time Warner remote set up to work seamlessly with your devices can sometimes feel like navigating a maze. That’s where this blog comes in. We’re here to demystify the process and guide you through the steps to program your Time Warner remote like a pro. Say goodbye to the frustration of juggling multiple remotes, and say hello to the convenience of one universal remote to rule them all.
In this blog, we’ll provide you with clear, step-by-step instructions to help you get your Time Warner remote up and running in no time. Let’s dive in and make your entertainment setup a breeze.
How To Program Time Warner Remote for TV
Step 1
Make sure your TV is on.
Step 2
Hold your Time Warner remote in close proximity to the TV you want to program.
Step 3
Find the Select/Ok button on your remote control. Hold down the TV button in addition to the button. When the little LED light blinks twice, let go of the button.
Step 4
Using the number keys on your remote control, enter the four-digit code you were given previously. All of the component buttons on your remote will blink three times when you enter the correct code. In that case, try the following code on the list.
Step 5
Press the Power button on your remote to test it. If your TV shuts off, you followed the steps properly. You might also try this action.
How To Program Time Warner Remote To DVD Player
Step 1
Make sure your DVD player is turned on.
Step 2
Hold your Time Warner remote in close proximity to the DVD player you want to set up.
Step 3
Find the Select/Ok button on your remote control. Hold down the button and the DVD button at the same time. When the little LED light blinks twice, let go of the button.
Step 4
Using the number keys on your remote control, enter the four-digit code you were given previously. All of the component buttons on your remote will blink three times when you enter the correct code. In that case, try the following code on the list.
Step 5
Press the Power button on your remote to test it. If your DVD player shuts off, the procedure is followed correctly. Also, you could try this with the volume button.
Read Also: philips-universal-remote-codes-for-hisense-tv/
How To Reset Your Time Warner Remote To Factory Settings
For various reasons, you may want to restore your remote control’s factory settings. To achieve it, follow the procedures below.
Step 1
On your remote, press the Select/OK button. When the component lights begin to flash twice, hold down the button for a few minutes.
Step 2
Using the number buttons on your remote, enter the numbers 9-8-1. The process is complete if the component buttons blink three times.
- Time Warner Remote Control Codes
- Admiral 107, 477
- Adventura 060
- Aiko 106
- Akai 044
- Alaron 193
- Ambassador 191
- American Action 194
- Ampro 765
- Anam 194
- AOC 033, 044
- Audiovox 106, 194, 465, 637
- Baysonic 194
- Belcor 033
- Bell & Howell 030, 168
- Bradford 194
- Brockwood 033
- Brocksonic 250, 477
- Candle 044, 070
- Carnivale 044
- Carver 068
- Celebrity 014
- Cineral 106, 465
- Citizen 044, 053, 070, 074, 106
- Concerto 070
- Contec 194
- Craig 194
- Crosley 068
- Crown 053, 194
- Curtis Mathes 030, 044, 053, 061, 065, 068, 070, 074, 107,
- 159, 168, 180, 465
- CXC 194
- Daewoo 033, 053, 106, 465, 637, 638
- Daytron 033
- Denon 159
- Dumont 031, 033
- Dwin 734, 788
- Electroband 014
- Emerson 033, 053, 168, 191, 192, 193, 194, 250, 477,
- 637, 638
- Envision 044
- Fisher 168
- Fujitsu 193
- Funai 185, 193, 194
- Futuretech 194
- GE 035, 061, 065, 107, 149, 192, 296, 465
- Gilbrater 031, 033, 044
- GoldStar 033, 044, 070,0192
- Gradiente 067, 070
- Grunpy (193,194)
- Hallmark 192
- Harley Davidson 193
- Harmon/Kardon 068
- Harvard 194
- Hitachi 070, 159, and 065
- Infinity 068
- Inteq 031
- JBL 068
- JCB 014
- JVC 067
- KEC 194
- Kenwood 033, 044
- KTV 044, 053, 194
- LG 070
- Logik 030
- Luxman 070
- LXI 061, 068, 168, 170, 192
- Magnavox 044, 068, 193
- Majestic 030
- Marantz 044, 068
- Matsushita 264
- Megatron 159, 192
- Memorex 030, 070, 164, 168, 192, 264
- MGA 033, 044, 164, 192
- Midland 031, 053, 061, 065, 149
- Minutz 035
- Mitsubishi 033, 107, 164, 192
- Motorola 107
- MTC 033, 044, 164, and 192
- Multitech 194
- NAD 170, 180, and 192
- NEC 033, 044, and 070
- Nikko 044, 106, 192
- NTC 106
- Onwa 194
- Optimus 168, 180, and 264
- Optonica 107, 179
- Orion 193, 250, and 477
- Panasonic 065, 264
- Penney 033, 035, 044, 053, 061, 065, 070, 074, 149,
- 170, 192
- Philco 033, 044, 068, 159, 477
- Philips 068
- Pilot 033, 044, and 053
- Pioneer 180
- Portland 033, 053, 106
- Prism 065
- Proscan 061
- Proton 192, 480
- Pulsar 031, 033
- Quasar 065, 179, 264
- RCA 033, 061, 065, 104, 107, and 149
- Radio Shack 033, 044, 053, 061, 070, 168, 179, 192, 194
- Realistic 033, 044, 053, 070, 168, 179, 192, 194
- Runco 031, 044, 617
- Sampo 044, 053
- Samsung 033, 044, 070, 074, 192
- Samsux 053
- Sansei 465
- Sansui 477
- Sanyo 168
- Scimitsu 033
- Scotch 192
- Scott 033, 192, 193, 194, 250
- Sears 061, 068, 070, 168, 170, 185, 192, and 193
- Semivox 194
- Semp 170
- Sharp 053, 107, 179
- Shogun 033
- Signature 030
- Sony 014
- Soundesign 192, 193, 194
- Squareview 185
- Starlite 194
- SSS 033, 194
- Supreme 014
- Sylvania 044, 068
- Symphonic 185
- Tandy 107
- Tatung 069
- Technics 065, 264
- Technol Ace 193
- Techwood 065, 070
- Teknika 030, 033, 053, 068, 070, 074, 106, 164, 193,
- 194
- Telefunken 070
- TMK 070, 191, 192
- Toshiba 074, 168, 170
- Totevision 053
- Vector Research 044
- Victor 067
- Vidikron 068
- Vidtech 030, 192
- Wards 030, 033, 035, 044, 068, 070, 179, 192, 193
- White Westinghouse 637, 638
- Yamaha 033, 044
- Zenith 030, 031, 106
Time Warner Remote Issues
A few simple issues can be the cause of your Time Warner universal remote control not functioning. This session will identify problems that could cause your universal remote to cease functioning and show you how to fix them.
Battery: A faulty or missing battery can prevent your universal remote from functioning. To make sure the batteries are installed correctly, check the battery box of your remote. Additionally, make sure the batteries are dry—being damp is a symptom of damage.
Object: If something is blocking your TV or the device you wish to program, your universal remote control will not work.
Correct Code: Entering the incorrect code will cause your universal remote control to go wrong. Thankfully, all of the codes for your Time Warner remote have been listed on this site. We provided multiple codes for the majority of devices. Duplicate the following code and try it if the first one doesn’t work. We appreciate you reviewing our instructions on how to set up the Time Warner remote.
Troubleshooting Tips
Troubleshooting your Time Warner remote? Here are some tips:
- Check Batteries: Ensure they’re fresh and inserted correctly.
- Remote Mode: Confirm it’s in the right mode (TV, Cable, DVD, etc.).
- Reboot Devices: Power-cycle your TV and cable box.
- Remote Pairing: Re-pair the remote if it’s not responding.
- Code Entry: Re-enter device codes carefully.
- Signal Interference: Remove obstructions and check for interference.
- Remote Sensor: Ensure nothing blocks the remote sensor on your devices.
- Remote Damage: Inspect for physical damage or worn-out buttons.
- User Manual: Consult the manual for model-specific troubleshooting steps.
- Customer Support: If all else fails, contact Time Warner or your cable provider for assistance.
Conclusion
In conclusion, setting up a Time Warner remote is a simple operation that gives you easy access to your devices. You may effectively program your remote to work with your TV, audio system, and other devices by following the detailed steps provided in this tutorial.
Start by finding the appropriate programming codes for your particular devices by looking them up in the manual or online. Make sure your devices are turned on and within the remote’s range after you receive the codes. Enter the codes into the remote control using the proper technique, such as the Auto-Search or Manual Entry methods.
By combining control of various devices into one practical tool, programming your Time Warner remote can save you time and effort. You may enjoy a smooth entertainment experience with a correctly programmed remote, allowing you to easily explore channels, change settings, and use your devices.