Insignia Soundbar Universal Remote control

If you’re looking for Insignia Soundbar Universal Remote control codes,  to program the player? The codes below are described in this post. There are a lot of Insignia Soundbar remote control codes listed below. For each device, we gave more than one code. So kindly try another code if one of the codes doesn’t work. The code is often a four-digit number.

Insignia is one of the most well-known Soundbar brands on the market today. An Insignia Soundbar typically comes with a remote. However, you can program the Soundbar using a universal remote if for any reason you are unable to control it with your device.

To make your Insignia Soundbar functional with your universal remote control, you must learn how to program it before using the code. The instructions for setting up an Insignia Soundbar with a universal remote control are provided below as well.

3 Digits Universal Remote codes for Insignia Soundbar

  • 751
  • 538
  • 539
  • 589

5 digits Universal Remote codes for Insignia Soundbar

  • 21268
  • 12002
  • 33591
  • 10463
  • 11564

How to program Universal Remote control for Insignia Soundbar

  • First, turn on your Insignia SOUNDBAR system.
  • Face the INSIGNIA Soundbar you want to program while holding your universal Soundbar remote.
  • On your universal remote, locate the ‘Menu’ option.  Select “Programme Remote” from the menu under “Settings,” then select “SOUND” or any other device you want to program.
  • The little light should blink four times if you followed the steps correctly. Pick one of the above codes for your device and input it when it does. Once you enter the right code, the button light will turn off. Try another code if necessary.
  • Use any of the remote control’s function keys. If it functions, you followed the instructions correctly. If it is unsuccessful, repeat the steps and try with another code.

Read Also: Philips Universal Remote Codes For Insignia TV

How to program codes for the Insignia Soundbar Universal Remote

  • Earlier, it was discussed how to set up your universal remote to control your Insignia Soundbar. If the method does work, you can apply the alternative technique.
  • The first step is to find the PROG button on your remote control and press it until a little LED light appears.
  • Select the “Soundbar” menu item.
  • Find the proper Soundbar code for the Insignia Soundbar above, and enter the space for codes.
  • If the light goes off when you enter the code, it shows you got the correct code.

How to check if an Insignia Remote is a Universal Remote

Some Insignia Soundbar remote controls are universal remote controls. Meaning that devices other than the Insignia Soundbar can be powered via the remote.

 If your Insignia remote offers the ‘Set’ and ‘Mode’ choices, it is likely a universal remote. It is a universal remote if it does.

Please assist us by adding any additional code you may have that is not present in these to the comment section. We will be very grateful for that.

Troubleshooting Tips

Troubleshooting Tips for Insignia Soundbar Issues

  1. Power Cycle: Unplug the soundbar and wait for a few seconds before plugging it back in to reset any temporary glitches.
  2. Check Connections: Ensure all cables are securely connected to their respective ports to avoid audio disruptions.
  3. Remote Battery: Replace the remote batteries if it’s unresponsive or experiencing intermittent issues.
  4. Firmware Update: Check for available firmware updates on the manufacturer’s website and follow the instructions for an upgrade.
  5. Source Selection: Double-check the input source on the soundbar and TV to ensure the correct audio source is selected.
  6. Audio Settings: Adjust soundbar settings like bass, treble, and surround sound to optimize audio performance.
  7. Device Compatibility: Verify if the soundbar is compatible with your TV model and supports the audio format.
  8. Reset to Factory Settings: If problems persist, perform a factory reset on the soundbar to restore default settings.
  9. Interference: Keep electronic devices that may cause interference away from the soundbar to avoid audio disturbances.
  10. Contact Support: If troubleshooting doesn’t resolve the issue, reach out to Insignia customer support for further assistance.


Can I control my streaming media players like Roku and Apple TV with the GE 6-Device Universal Remote?

Absolutely! The remote supports programming for various audio/video devices, including streaming media players.

How do I program the GE 6-Device Backlit Universal Remote Control?

Programming the remote is easy. Follow the instructions provided in the user manual or use the auto-code search feature.

Leave a Comment