Logik DVD Player Universal Remote Codes

Are you tired of using multiple remote controls to control every device, and sometimes selecting the incorrect one? Allow the wonders of powers of the Logik DVD player remote to take charge and do away with the hurdle of using multiple remotes. One of the most robust and most dependable brands of universal remote control available today.

When programmed into your device, our broad variety of universal Logik DVD remote codes will function properly. It would be simpler to program the Logik DVD remote once you had matched the code to the brand and model of your device.

Logik DVD Universal Remote Code List

We have a variety of Logik DVD remote codes that you may use to test out the programming process. You could find it quite challenging to choose the correct Logik universal remote code for your type of device because there are so many of them available. Continue trying the code each time you get it wrong when there is a great one for your device in the whole list of Logik DVD universal remote codes that we give here.

Find the right code for your device from the list below:


How to Program Logik DVD Universal Remote

You are making the proper decision when you choose to control many devices with a single Logik DVD remote. It may sound a little difficult to program a Logik DVD remote, but it actually works the other way around. Simple procedures and a universal Logik DVD remote are all that are needed for this process to be completed. When programming your Logik DVD remote, follow these steps:

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to find the correct remote code that works with your remote. Follow the instructions below:

  • Turn on the smart device you want to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is ready to program, according to the LED light.
  • Use the remote to select the “CH+” and “CH-“ switches.
  • On/off indications are displayed on the remote. Press the “up” or “down” key until the device turns off.
  • Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is programmed properly.

To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

How to Program Logik DVD Universal Remote With Manual Method

The universal remote may be easily programmed using the keycode, which also helps to identify the make and model of your equipment.

  • You must “Turn The Device On”.
  • On your Logik DVD universal remote, press “TV.”
  • As soon as the universal remote displays the “Light Flash” (a sign that it is in “Learning mode”), push and hold the “Setup button” for a few seconds.
  • Finally, enter the “Keycode” that you have obtained from the Instructions Booklet for programming.
  • Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  • When the screen switches off, you can release the “Power Button”

That’s all there is to it; your TV should now work perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.

  • “Turn The Device On”.
  • Hold down the “Setup” button for a moment.
  • Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”

Finding your key code may take a little more time using the above method, but it is very essential. Your remote should function properly for all in-room functions once you have completed the above steps.

Read Also: huayu dvd universal remote codes


It will be very easy to control several devices with the Logik DVD remote. What level of programming expertise do you have? Has this article’s inclusion of codes and instructions proven useful? Leave a message and tell us about your experience. Your suggestions will help us make this website better. Or feel free to message me here if you wish to share a few codes that aren’t on the list above.

Troubleshooting Tips

Certainly, here are some troubleshooting tips you can include in your blog for common issues with Logik DVD player remotes:

  1. Remote Not Responding:
    • Check the batteries: Ensure the batteries are correctly inserted and have enough power.
    • The clear line of sight: Make sure there’s no obstruction between the remote and the DVD player.
  2. Programming Issues:
    • Recheck codes: If using universal codes, verify that you’ve entered the correct code for your DVD player.
    • Reset and retry: Reset the remote and try programming again according to the instructions.
  3. Buttons Not Working:
    • Clean the remote: Dust or debris might be affecting button responsiveness. Gently clean the buttons and surface.
  4. Device Not Powering On/Off:
    • Test other functions: If other functions work, the issue might be with the DVD player itself, not the remote.
  5. Remote Interference:
    • Nearby devices: Wireless devices can interfere with the remote’s signals. Move these devices away or try in a different location.
  6. Remote Signal Weakness:
    • Replace batteries: Weak batteries can result in a weak remote signal. Replace them if needed.
  7. Universal Remote Setup:
    • Consult manual: Follow the provided instructions meticulously to program your universal remote accurately.
  8. Remote Hardware Damage:
    • Inspect for damage: Check for physical damage that might hinder the remote’s functionality. Repair or replace if necessary.
  9. Remote Not Syncing:
    • Check device compatibility: Ensure the remote is compatible with your Logik DVD player model.
  10. Online Resources:
    • Online support: Utilize Logik’s official website or customer support for troubleshooting guides and assistance.

Remember to provide clear and concise steps for each troubleshooting tip, and encourage readers to contact Logik’s customer support for more complex issues or professional assistance.


Do universal remotes work on all DVD players?

A universal remote control can be used with DVD players made by different manufacturers, including Sony, LG, Samsung, and others. It also functions with TVs, Blu-ray players, cable boxes, and other entertainment systems.

Why is my universal remote not working?

However, battery problems, pairing problems, or infrared sensor problems are the most typical causes of a TV remote not working. Pointing the remote control at your TV, press the power button. On the TV, check to see if the LED indicator blinks. If not, your remote’s batteries are no longer sufficiently charged.

Leave a Comment