Magnavox Universal Remote Mc348 Codes | Updated 2023

Magnavox Universal Remote mc348 Codes

Hello, how are doing? Are you getting tired of searching multiple codes for your brand new Magnavox Universal mc348 Remote? But nothing works out correctly. Here we have done the work for you. We have listed all correct codes for Magnavox Universal mc348 Remote that will work with all of your entertainment devices.

In this post, you will get codes that are tested by our technical team and we assure you that these codes will work for you. After finding you need to start programming the remote with the device of your desire. And if you don’t know how to do it. We also have outlined the method of programming Magnavox Universal Remote.

All you need to do is just get code from the list and perform the programming step as mentioned. You will get your remote ready to use with your favorite entertainment device. So, come on let’s get started.

How To Program Magnavox Universal mc348 Remote

Here are steps to program Magnavox Universal mc348 Remote with TV, DVD, or any other device that you want. But before starting programming make sure you have gotten the remote code from the above list that is compatible with your appliances. You can highlight it or write it somewhere so you could get it easily in programming.

  1. Turn your device on manually.
  2. Aim the remote towards your device and press the “Setup” button.
  3. The indicator light will turn on and stay lit. Enter the “Code” for your device.
  4. If your entered code is correct the indicator light will turn off. Otherwise, it will blink once and remain on.
  5. Press the “Power” button your device will be turned off.
  6. Your device is now ready to work with your universal remote!

If this process does not work for you, check the provided code list for other codes that may apply to your unit. Start the process again from Step 2.

Automatically Program Magnavox Universal Remote without Codes  MC348

Although it takes a little time, this procedure is really effective. To find the most suitable code for your device, it searches through the whole database of codes that is saved on the remote. Let’s get started with the Magnavox remote configuration steps:

  • Put two AAA batteries in the remote control.
  • Manually turn the device on. We are using television as an example.
  • Scan the TV with the Magnavox remote control.
  • Hold down the “Code Search/SET” button while you wait for the remote light to come on. Turn the button off.
  • Press the remote’s device button now. We selected “TV” at this point.
  • After that, press and hold the “Power” button while you watch for the remote’s light to stop blinking.
  • Up until your television turns off, repeat this process again as necessary.
  • The device must be switched to “OFF” for the remote to have been correctly configured.
  • To store the code when the TV turns off, hit the “Enter” button on the remote control within 3 seconds.
  • It’s time to check the remote’s operation. To test whether everything is operating properly or not, press various buttons, such as the power, volume, and channel-changing buttons.
  • You are ready to go if every feature is operating correctly. You must reprogram the remote control if there is a problem.

Troubleshooting Tips

If you are having any issues in programming Magnavox Universal mc348 Remote here are some troubleshooting tips that will help you in programming your universal remote.

  • Re‐install the batteries of your remote.
  • Check batteries if they are old then replace them with new batteries according to the polarity marking inside the battery compartment
  • Reset the Universal Remote by pressing the Power button for three seconds.
  • Make sure the remote control is aimed at the device correctly.
  • Plug off and then on your device.
  • Protect the remote from direct sunlight because when in direct sunlight, an incandescent lamp, fluorescent lamp, or any other strong light shines on the remote sensor of the device, the remote operation may be unstable.


We congratulate you! Your Magnavox universal remote is now paired with your home entertainment system perfectly, now you are ready to control all your devices with ease. If you have any suggestions or facing any issues, don’t hesitate to reach out to us in the comments section below. We’re here to help you get the most out of your remote!


Are Philips and Magnavox the Same?

No, both are different. Philips is a part of the Dutch electronics company since 1974, and Magnavox is an American electronics business with the Latin name “great voice (stylized as MAGNAVOX).

How do I manually Program my Magnavox Universal Remote?

To manually program Magnavox universal remote release the Code Search Button after holding it down for around 2 seconds while waiting for the LED Indicator to turn on. Then press the device selection button for the one you want (Ex: TV Button).  Your remote will find the remote code for your device automatically. 

How do I find my 4-digit remote code?

You can find a four-digit remote code for your device from the code list mentioned above. Check your device brand we have an alphabetically arranged code list that will help you to program Magnavox universal remote.

Leave a Comment