Remote Control Codes For JENSEN TVs

Welcome to our blog! If you own a Jensen TV and have been on the hunt for universal remote codes to enhance your viewing experience, you’ve come to the right place. In this article, we’ve compiled a comprehensive list of all the remote codes you’ll need to program your favourite universal remote control to seamlessly work with your Jensen TV. Whether you have a 3, 4, or 5-digit remote, we’ve got you covered.

Say goodbye to juggling multiple remotes and say hello to a more convenient and enjoyable TV-watching experience. Let’s dive in and unlock the full potential of your Jensen TV with these remote control codes!

Universal Remote Codes for Jensen TV And Programming

Your remote will begin to function after entering any code with the help of the provided instructions.

RCA Universal Remote Codes for Jensen TV 

1004

1196

1006

GE Universal Remote Codes for Jensen TV

0009

0133

0004

Philips Universal Remote Codes for Jensen TV

0502

0002

0914

3 Digit Universal Remote Codes for Jensen TV

• 009
• 004

4 Digit Universal Remote Codes for Jensen TV

• 0133
• 0009
• 0004

5 Digit Universal Remote Codes for Jensen TV

• 11933
• 10761
• 11299
• 11326
• 10050
• 10817
• 12726
• 12210
• 10005
• 12541
• 10815
• 13204

How To Program Jensen TV Universal Remote?

The methods listed below will differ depending on the universal remote control you are using to operate your TV, so switch between them anytime your remote and TV don’t seem to be synchronized with the codes. So let’s begin the programming right away.

As an alternative, you can use the ge universal remote codes for Jensen TV, the Jensen universal remote codes jer 422, the Jensen TV codes directv, etc. to search for your codes in your remote control.

Read Also: 5 digit universal remote codes for tv

Jensen TV Universal Remote Without Codes

All universal remote codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to determine the correct remote code that works with your remote. Follow the instructions below:

• Turn on the smart device you want to use the universal remote to control, such as the TV.
• To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is prepared to program, according to the LED light.
• Use the remote to select the “CH+” and “CH-“ switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
• Click the “power” key to confirm the code. The system should start up. If it does, try a different channel to make sure the remote is programmed properly.

To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

Jensen TV Universal Remote With Manual Method

The universal remote may be readily programmed using the keycode, which also serves to identify the make and model of your equipment.

• You must “Turn The Device On” first.
• Press the “TV” button on your “Jensen TV universal remote”
• As soon as the universal remote displays the “Light Flash” (a sign that it is in “Learning mode”), push and hold the “Setup button” for a few seconds.
• Finally, enter the “Keycode” that you have obtained from the Instructions Booklet for programming.
• Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
• When the screen dims, you can let go of the “Power Button.”

That’s all there is to it; your TV should now operate perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

Jensen TV Universal Remote With Code Search

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.

• “Turn The Device On” first.
• Hold down the “Setup” button for a moment.
• Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case your TV, “Turns Off.”

Finding your key code may take a little more time using the above method, but it is very important. Your remote should function properly for all in-room functions once you have completed all of the previous steps.

Troubleshooting Tips

1. Check Batteries: The first and simplest step in troubleshooting remote control issues is to check the batteries. Low or dead batteries can often be the culprit behind unresponsive remotes. Replace the batteries with fresh ones and ensure they are inserted correctly.
2. Verify Line of Sight: Ensure there are no obstructions between the remote and the TV’s infrared sensor. Objects or obstacles in the line of sight can prevent the remote signals from reaching the TV effectively.
3. Clean the Remote: Over time, dust and debris can accumulate on the remote’s buttons and sensor, hindering its functionality. Gently clean the remote with a soft, lint-free cloth to remove any dirt and grime.
4. Re-Pair the Remote: If you’re using a universal remote or a remote with advanced features, it might need to be paired or reprogrammed with the Jensen TV. Refer to the remote’s manual or the TV’s user guide for instructions on how to pair the remote.
5. Try Different Codes: If you’re using a universal remote and the provided codes aren’t working, try other codes for Jensen TVs. Universal remotes often have multiple codes for different TV models, so keep trying until you find the one that works.
6. Reset the Remote: Some remotes have a reset function that can resolve issues caused by incorrect settings or glitches. Look for the reset button or follow the instructions in the user manual to perform a reset.
7. Check Remote Mode: Some remotes have multiple modes (e.g., TV, DVD, AUX) that need to be set correctly for the TV to respond. Make sure the remote is in the appropriate mode for controlling the TV.
8. Check TV Settings: Occasionally, remote control issues can be attributed to TV settings. Ensure that the TV’s “Remote Control” or “IR Receiver” setting is enabled in the TV menu.
9. Test with Another Remote: If possible, test the TV with a different remote to determine if the issue lies with the TV or the remote itself. This can help narrow down the cause of the problem.

FAQs