100+ Samsung Blu-ray Player Remote Codes

Greetings! What going on? Are you in search of the correct Samsung Blu-ray Player remote codes? Look no further! We’ve got you covered with a comprehensive list of codes that will make it easy to control your Blu-ray player.

Unlock the full potential of your Samsung Blu-ray Player with our comprehensive guide to programming universal remotes. We’ve done the research for you and compiled a list of codes for all the major brands, including RCA, GE, and Philips. But we don’t stop there, our step-by-step programmed methods and techniques make it easy for you to set up your remote in no time.

And if you do run into any issues, our troubleshooting section is on hand to guide you through any problem. This post is truly the ultimate resource for programming your Samsung Blu-ray Player with any universal remote. Don’t let your remote control gather dust, grab the codes and start programming today!

Samsung Blu-ray Player Remote Codes

To program Samsung Blu-ray Device with any universal remote here is complete list of Samsung Blu-ray Remote Codes:

• 0199
• 01877
• 01982
• 12051
• 10812
• 10702
• 10766
• 10060
• 10650
• 10814
• 11060
• 11903
• 10178
• 20240
• 20199
• 20820
• 20573
• 21075
• 22069
• 22369
• 20744
• 20490
• 20045
• 22329
• 22489
• 22556
• 21470
• 21044
• 31868
• 31295
• 31500
• 31304

Samsung Blu-ray Player Universal Remote Codes For Philips

• 1440, 0342, 1511, 0895, 0790, 0997, 1540, 0147, 1340, 0047

Samsung Blu-ray Player Universal Remote Codes For GE

• 2345, 2325, 4095, 4125, 2725, 0075

Samsung Blu-ray Player Universal Remote Codes For RCA

• 3519, 3308, 3471, 3525, 3521, 3506, 3394

How To Program Samsung Blu-ray Player With Any Universal Remote?

To program a Samsung Blu-ray player with a universal remote, you will need to follow these steps:

1. Turn on your Samsung Blu-ray player.
2. Locate the code for your universal remote.
3. Press and hold the “Setup” button on your universal remote until the indicator light turns on.
4. Press and release the “B-ray” Button.
5. Enter the Code for your Samsung Blu-ray player from the code list. You may need to try several codes before finding the one that works for your specific model.
6. Point the universal remote at your Samsung Blu-ray player and press the “Power” button. If the player turns off, it means that the code was entered correctly.
7. Test the other buttons on the universal remote to make sure they are functioning as they should.

How To Program Samsung Blu-ray Player Without Codes?

1. Press the “SETUP” and “Blu-ray” buttons at the same time.
2. Press the “SETUP” button once more when the red light turns on, and the light should start blinking and demanding universal remote codes.
3. Next, repeatedly press the “POWER” button until your Blu-ray goes off.
4. Follow the instructions exactly and be sure to work slowly.
5. Press the “Blu-ray” button after turning off your Blu-ray player to save the device code.
6. The light will stop blinking and turn off, indicating that your remote control has now been programmed.

Troubleshooting Tips

Here are some troubleshooting tips to help you program your Samsung Blu-ray player remote codes:

1. Double-check the code list: Make sure you are entering the right code for your individual model of Samsung Blu-ray player. Check the code list twice and try inputting the code once more.
2. Check the batteries: Make sure the batteries are fresh and properly put in your universal remote by checking the batteries. The remote control may stop working due to weak batteries.
3. Try a different code: If the first code you input for your Samsung Blu-ray player does not work, try another code. Before the right code is found, it can take a few tries.
4. Check the distance: Ensure that there are no barriers between the Samsung Blu-ray player and the universal remote, and that the universal remote is pointed directly at it.
5. Check the IR sensor: Verify the IR sensor on the Samsung Blu-ray player to make sure it is not covered and that it is working normally.
6. Reset the universal remote: If the universal remote control isn’t operating properly, try resetting it to the default factory settings. 
7. Contact the manufacturer: If you’re still having issues, get in touch with the manufacturer of the universal remote for more help. They might have further troubleshooting procedures, or a customer care agent can assist you.

It’s possible that the above steps will help you to program your Samsung Blu-ray player remote codes, but if you still have any difficulty, it’s recommended to check the user manual of your specific Samsung Blu-ray player model or contact the Samsung customer service for further assistance.

Wrapping Up

Programming your Samsung Blu-ray player with a universal remote is a simple and straightforward process. By following the steps outlined above, you can easily take control of your entertainment system and enjoy the convenience of using one remote for all your devices.

We hope that you have successfully found the correct code for your specific model and that you are now enjoying the full functionality of your universal remote. However, if you experience any issues or need further assistance, please do not hesitate to reach out to us. We are here to help and wish you a happy programming experience!