Sanyo Blu-ray Universal Remote Codes

Hey, Do you need Universal Remote Codes For Your Sanyo Blu-ray? If yes, then we are here to help you. On this web page, we have provided the most useful Sanyo Blu-ray Universal Remote Codes.

All the provided codes are fully tested by our technical team and we are sure about them. So, forget about all worries just get the code below list and start programming your Sanyo Blu-ray with universal remote control.

Sanyo Blu-ray Universal Remote Codes

This page is specified to Universal Remote Codes For Sanyo Blu-Ray Player. If you want to control other home equipment with your chosen universal remote you can get various other remote code lists HERE.

Sanyo Blu-ray Universal Remote Codes List

Sanyo Blu-ray 4-Digit Universal Remote Codes


How To Program Sanyo Blu-Ray With Universal Remote Control?

After finding the right code for Blu-ray Player it’s time to program it with a branded universal remote. For this purpose, we have outlined the step-by-step instructions to program Sanyo Blu-Ray With Universal Remote Control. So, let’s get started.

Program Sanyo Blu-Ray Universal Remote With Codes

  1. Turn the Sanyo Blu-ray Player ON.
  2. Then, press the Device button on your Universal Remote.
  3. Press the Setup button of the Universal Remote and hold it until the light indicator starts flashing.
  4. Now, Enter the code that you find on this website.
  5. Then, point the universal remote at the Blu-ray Player.
  6. And press and hold the Power button Blu-ray will switches off.
  7. It means, you have entered the correct code, if it’s still ON repeat the process with another code.
  1. Switch on the smart device.
  2. On the Universal Remote, tap on the device(Blu-ray) button for 3 seconds.
  3. Point the remote towards the Blu-ray and click on CH+ and CH- switches.
  4. Press and Hold the Up or Down key until the device turns off.
  5. Then, Press the Power Key. Your Blu-ray Player will turn on.
  6. After the complete process, try changing the channel to verify.

Program Sanyo Blu-Ray Universal Remote With Manual Method

  1. First, you must turn the Blu-ray switch On.
  2. After that on your universal remote locate the Device button and Press it.
  3. Then press and hold the Setup button until the light flashes.
  4. Lastly, enter the Code you got from the programming manual.
  5. Then aim your remote at the Blu-ray player and then press the Power button.
  6. You can release the Power Button when your Device turns off.

Leave a Comment