Sharp Aquos Blu-ray Universal Remote Codes

Hello, Are you looking for Sharp Aquos Blu-ray Universal Remote Codes? I am sure you are saying yes, don’t worry you are on the right page. Here you will get all the 3 and 4 Digit Universal Remote Codes For the Sharp Aquos Blu-ray player.

Moreover, You can also learn about how to program your Sharp Aquos Blu-ray Player with any branded universal remote. Because we have outlined three methods to program Sharp Aquos Blu-ray.

Sharp Aquos Blu-ray Universal Remote Codes

Your Sharp Aquos Blu-ray player will be ready to use after entering these below-mentioned codes. But wait if you want to program any other device with your favorite universal remote control you can check the remote code lists HERE.

Sharp Aquos Blu-ray Universal Remote Codes List

Sharp Aquos 3 Digit Blu-ray Universal Remote Codes

206	207
222	226
227	234
239	242
246	248
254	266
268	273
274	275
280	285
287	300
340	341
360	361

Sharp Aquos 4 Digit Blu-ray Universal Remote Codes

2250	0679
0689	0397
0897	0908

How To Program Sharp Aquos Blu-Ray With Universal Remote Control?

After finding the right code for Blu-ray Player it’s time to program it with a branded universal remote. For this purpose, we have outlined the step-by-step instructions to program Sharp Aquos Blu-Ray With Universal Remote Control. So, let’s get started.

Program Sharp Aquos Blu-Ray Universal Remote With Codes

1. Turn the Sharp Aquos Blu-ray Player ON.
2. Then, press the Device button on your Universal Remote.
3. Press the Setup button of the Universal Remote and hold it until the light indicator starts flashing.
4. Now, Enter the code that you find on this website.
5. Then, point the universal remote at the Blu-ray Player.
6. And press and hold the Power button Blu-ray will switch off.
7. It means, you have entered the correct code, if it’s still ON repeat the process with another code.

Program Sharp Aquos Blu-Ray Universal Remote With Auto-Search

1. Switch on the smart device.
2. On the Universal Remote, tap on the device(Blu-ray) button for 3 seconds.
3. Point the remote towards the Blu-ray and click on CH+ and CH- switches.
4. Press and Hold the Up or Down key until the device turns off.
5. Then, Press the Power Key. Your Blu-ray Player will turn on.
6. After the complete process, try changing the channel to verify.

Program Sharp Aquos Blu-Ray Universal Remote With Manual Method

1. First, you must turn the Blu-ray switch On.
2. After that on your universal remote locate the Device button and Press it.
3. Then press and hold the Setup button until the light flashes.
4. Lastly, enter the Code you got from the programming manual.
5. Then aim your remote at the Blu-ray player and then press the Power button.
6. You can release the Power Button when your Device turns off.