3, 4, 5 Digit Skyworth TV Universal Remote Codes

Hi there! Are searching for Skyworth TV Universal Remote Codes? If yes, then you are on the right web page. Here you will get all 3, 4, and 5 Digit Universal Remote Code For Skyworth TV. After the code lists, we have also outlined the methods that you can use to program your favorite remote with Skyworth TV.

3, 4, 5 Digit Skyworth TV Universal Remote Codes

In this post, We have codes for your Skyworth TV below if you bought a universal remote control and need them to operate your Skyworth TV. If you want to program any other device with that remote you can check other remote code lists HERE.

Skyworth TV Universal Remote Codes List

3 Digit Skyworth TV Universal Remote Codes


4 Digit Skyworth TV Universal Remote Codes


5 Digit Skyworth TV Universal Remote Codes


Chunghop Universal Remote Codes For Skyworth TV

  • 057
  • 073
  • 036
  • 044

How To Program Skyworth TV Universal Remote?

In order to set up Universal Remote Control with the Skyworth TV, you need to program the universal remote with the TV properly. So, here we have outlined all the methods that you can use according to your needs. If none of the above-mentioned codes work for you, you can follow the other two methods code search or the manual method.

Program Skyworth TV Universal Remote With Codes

  1. Turn the TV On that you want to program.
  2. Aim your universal remote to the TV.
  3. Locate and press the TV button on your universal remote.
  4. First press and hold the Setup button.
  5. Then, use the list of codes above to find the code that is compatible with the brand of your TV.
  6. The little light will blink four times if you followed the steps correctly.
  7. Once you enter the right code, the button light will turn off. Try another code if necessary.
  1. Turn the device In this case TV On first.
  2. Hold down the Setup button for a moment.
  3. Enter the 3-digit, 4-digit, or 5-digit codes.
    After that, you need to hold down the Power Button on the remote control.
  4. While pressing the Channel up button until your TV, Turns Off.

Program Skyworth TV Universal Remote With Manual Method

  1. First, you must turn the TV On.
  2. After that on your universal remote locate the TV button and Press it.
  3. Then press and hold the Setup button until the light flashes.
  4. Lastly, enter the Code you got from the programming manual.
  5. Then aim your remote at the TV  and then hold down The Power button.
  6. You can release the Power Button when your TV turns off.

Leave a Comment