Symphonic DVD Player Universal Remote Codes

Hello, How are you doing? Do you own a Symphonic brand DVD player? You’ve come to the right website if, for whatever reason, you’ve misplaced or broken your symphonic DVD remote. These are the most recent Symphony DVD player codes, which you may use to quickly set up your remote control to work with your DVD.

You can find all the most recent, authentic Symphonic DVD Player Universal Remote Codes here. Right here, which you’ll need to set your universal remote to operate with your DVD player. The majority of these universal symphonic DVD codes are made up of three, five, and four digits. Use the code in accordance with the manufacturer and version of your universal remote.

Symphonic DVD Universal Remote Codes List

The programming of remote controls for any smart devices you own requires the use of these universal remote codes. To find out what kind of remote code a particular brand of remote may use for programming, consult the user manual for that remote. After getting this you may program your remote by selecting a code from the list below.

  • 2321
  • 0456
  • 0458
  • 0227
  • 0899
  • 0236

Symphonic DVD Player GE Universal Remote Codes

456, 458, 0899, 0456, 0458, 6022, 6042, 6088, 6167, 6168, 0445, 0795, 0975, 3745, 3815, 3855, 1612

Symphonic DVD Player Vizio Universal Remote Codes

  • 0456
  • 0458
  • 0227
  • 0899
  • 0236

How to program Symphonic DVD Universal Remote?

It’s very simple to program a universal remote to control your smart device, but you must carefully follow the instructions or you will need to restart the process. The programming procedures and guidelines for programming a symphonic DVD remote are listed below. Choose a method from this list, then get to work. Use an alternative way or try modifying the remote code if the technique doesn’t work with your remote.

How to Program Symphonic DVD Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to find the right remote code that works with your remote. Follow the instructions below:

  • “Turn on” the smart device you want to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is prepared to program, according to the LED light.
  • Use the remote to choose the “CH+” and “CH-“ switches. 
  • On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  • Click the “power” key to confirm the code. It should start up. If it does, check a different channel to make sure the remote is programmed properly.
  • To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was saved.

How to Program Symphonic DVD Universal Remote With Manual Method

The universal remote may be easily programmed using the keycode, which also serves to identify the make and model of your equipment.

  • You must first “Turn The Device On.”
  • On your “Symphonic DVD universal remote,” choose “TV.”
  • In order to put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  • At last, key in the “Keycode” you collected from the programming manual (Instructions Booklet)
  • Just “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  • When the screen switches off, you can release the “Power Button.”

That’s all there is to it; your TV should now work perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

You can put your universal remote to search mode and look for the right key code if you are unable to find it at that moment. The remote control is forced into search mode by a code in the instructions.

  • “Turn The Device On”.
  • Hold down the “Setup” button for a moment.
  • Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”

Finding your key code may take a little more time using the above method, but it is very important. Your remote should function properly for all in-room functions once you have completed the above steps.


We hope that our post about Symphonic DVD remote codes will be helpful to you as you set up your remote. Please share your thoughts and experiences regarding our website. This will enable us to better serve you and improve the functionality of the website. If you find an additional universal remote code that is not included here, you can also contact us via comments.

Troubleshooting Tips

Sure, here are some troubleshooting tips for your Symphonic DVD Player:

  1. Remote Issues: If the remote isn’t working, check batteries, ensure line-of-sight, and try re-syncing it with the player.
  2. Playback Problems: Clean the disc if it’s skipping or freezing. Update firmware for compatibility with newer discs.
  3. No Power: Confirm the power outlet is working. Check power cable connections and ensure the player’s power button is on.
  4. Audio/Video Problems: Check cables for proper connections. Adjust TV input settings to match the player’s output.
  5. Disc Loading Errors: Gently clean the disc and try again. If the issue persists, the player’s lens might need cleaning.
  6. Remote Code Issues: Double-check you’ve entered the correct universal remote code. Refer to the manual for guidance.
  7. Internet Connectivity: If your player has internet features, ensure it’s appropriately connected to access streaming services.
  8. Frozen Screen: Restart the player by unplugging it for a minute. Ensure good ventilation to prevent overheating.
  9. Subtitles/Captions: Adjust the player’s settings for subtitles. Ensure the disc supports subtitles if you’re having issues.
  10. Factory Reset: As a last resort, perform a factory reset (refer to manual) to resolve persistent problems.


How to program an RCA universal remote to a symphonic DVD player?

Press the DVD button and the code search button at the same time if you wish to link your remote control to a DVD player. Once blinking, the remote light will then continue to glow. Using the number pad on your keyboard, enter the code while maintaining pressure on the device button.

How do I find my RCA remote code?

You can use the RCA remote code finder or consult the instructions for your remote to locate this code. The devices you wish to link should be turned on. Hold down the remote’s Code Search button while pressing it.

Leave a Comment