Programming Terk Universal Remote Codes | Updated 2024

Programming Terk Universal Remote Codes

Hey, how are you doing? Are you looking for Terk Universal Remote Codes? Do you want to know how to program Terk universal remote for your device? No need to worry about it! Fortunately, you are at the right place. On this web page, we have collected all the 3 Digit, 4 Digit, and 5 Digit codes for all your home devices like TVs, Blu-Ray players, Soundbars, DVD players, and many more.

Below we have listed all the Terk Universal Remote Control Codes for All Devices. All the provided codes are fully tested by our technical team and we are sure about them. So, just go and find the code for your device from the list below.

Terk Universal Remote Codes For All Devices

As there are many brands of remotes like Terk, but here you will only get Terk Remote Codes List. If you want to operate your devices using another Universal Remote, then you can check the list HERE: https://universalremotecodeslist.com/category/codes-by-remote/

Terk Universal Remote Codes List

BRAND NAMEREMOTE CODES
AOC1004, 1005, 1006, 1007, 1175, 1082, 1176, 1195, 1196, 1237
Admiral 1001, 1173, 1083, 1211
Aventura1174
Aiko1016
Akai1002
Apex1236, 1240, 1241
Audiovox1038
Broksonic1250, 1280
Citizen1004, 1006, 1008, 1171, 1038, 1016, 1105, 1196, 1132
Craig1038
Curtis Mathes1000, 1004, 1006, 1015, 1049, 1105, 1073, 1171, 1196, 1212
Daewoo1004, 1005, 1006, 1018, 1017, 1082, 1171, 1202, 1196
Daytron1004, 1006, 1171, 1196
Emerson1004, 1006, 1012, 1025, 1023, 1029, 1030, 1035, 1033, 1037, 1036,
Envision1004, 1006, 1196
Fujitsu1046, 1047
Funai1038, 1046, 1047
GE1000, 1003, 1004, 1006, 1022, 1052, 1054, 1087, 1100, 1165, 1166
Goldstar1004, 1005, 1006, 1012, 1056, 1019, 1082, 1155, 1156, 1172, 1196
Hisense1237
Hitachi1004, 1006, 1012, 1013, 1135, 1136, 1145, 1063, 1179, 1185
Infinity1062, 1130
JVC1012, 1013, 1014, 1054, 1060, 1063, 1066, 1123, 1157, 1159
Jensen1004, 1006, 1196
LG1005, 1082
Magnavox1004, 1006, 1008, 1019, 1062, 1069, 1075, 1077, 1088, 1130
Mitsubishi1004, 1005, 1006, 1022, 1051, 1079, 1080, 1082, 1064
Motorola 1003, 1173
Panasonic1003, 1214, 1351, 1054, 1130, 1062, 1160, 1350
Philco1003, 1004, 1005, 1006, 1008, 1062, 1069, 1019, 1075, 1077, 1082, 1088
Philips1003, 1004, 1008, 1019, 1012, 1062, 1068, 1069, 1075, 1088, 1087
Pioneer1004, 1006, 1136, 1179, 1185, 1196
Proscan1000, 1100, 1181, 1212, 1233
Proton1004, 1006, 1012, 1196
RCA1000, 1003, 1004, 1005, 1006, 1007, 1019, 1082, 1096, 1099, 1098
Samsung1004, 1005, 1012, 1015, 1019, 1082, 1105, 1106, 1171, 1172, 1196
Sansui1191, 1208, 1282
Sanyo1004, 1048, 1073, 1080, 1108, 1169, 1180, 1196
Scott1004, 1006, 1012, 1035, 1038, 1047, 1046, 1196
Sharp1004, 1006, 1012, 1026, 1029, 1095, 1111, 1112, 1171, 1173, 1196
Signature1001
Sony1002, 1205, 1216, 1218
Sylvania1004, 1006, 1008, 1019, 1062, 1068, 1075, 1076, 1077, 1088, 1130
Symphonic1033, 1038, 1189
Teknika1001, 1004, 1005, 1006, 1008, 1013, 1014, 1016, 1038, 1046, 1047, 1063
Toshiba1049, 1071, 1072, 1073, 1105, 1109, 1117, 1118, 1160, 1283
Yamaha1004, 1005, 1006, 1019, 1082, 1196
Zenith1004, 1083, 1151, 1152, 1154, 1196, 1210, 1217

How To Program Terk Universal Remote with my Device?

Below we have two methods to program Terk Remote with any device. Follow the steps to program your Terk Universal remote to your device and control them with all ease.

Programming Terk Universal Remote Without Code Method

  • Turn on your device( e.g. Tv, DVD player, VCR, etc.) that you want to program.
  • Press the Component button and then press the OK/SEL buttons together.
  • Keep pressing them until a flashlight glows, it means your device is ready to be programmed.
  • Now point your remote to the device and keep pressing CH+ and CH- buttons until your device turns off.
  • Now test your device and then finally save the code.

Programming Terk Universal Remote With Code Method

  • Turn on your device( e.g. Tv, DVD player, VCR, etc.) that you want to program.
  • Press the Component button and then press the OK/SEL buttons together.
  • Keep pressing them until a flashlight glows, it means your device is ready to be programmed.
  • Now point your remote towards your device and enter 3 Digit code for your brand of device.
  • If the code is correct, your device will turn OFF. Now press the Power Button to turn ON the device and check by using VOL+ or VOL- buttons.
  • If still your device is not working then retry the procedure with another code.
  • If your device is working properly, it means you have successfully programmed it.
  • Now hit the Component button to save the code.

These are the simple methods to program your Terk Universal Remote Control with your device. If your remote is not programming with one method, try another one.

These are the simple methods to program your Onkyo Receiver Universal Remote Control with your device. If your remote is not programming with one method, try another one.

Leave a Comment