Universal Remote Codes for TCL TV

Welcome to our comprehensive guide to universal remote codes for TCL TVs. Tired of managing multiple remotes? We’ve got you covered! In this article, we’ll provide you with a handy list of universal remote codes that can help you streamline your entertainment setup and control your TCL TV effortlessly. Additionally, we’ll walk you through troubleshooting tips for those frustrating moments when your remote doesn’t seem to cooperate. Say goodbye to remote-related headaches and hello to a smoother TV experience. Let’s dive in!

The universal remote can be programmed to work with any home appliance, including televisions, DVD players, and other devices, using the remote codes. So, follow the guidelines below to connect your preferred universal remote to your TCL TV.

RCA Universal Remote Codes for TCL TV


GE Universal Remote Codes for TCL TV


Philips Universal Remote Codes for TCL TV


Spectrum Universal Remote Codes for TCL TV


Comcast Universal Remote Codes for TCL TV


Xfinity Universal Remote Codes for TCL TV


Vivitar Universal Remote Codes for TCL TV


One-For-All Universal Remote Codes for TCL TV


How to Program Your TCL TV Universal Remote Without Codes

This technique uses auto search. For instance, your remote scans all of the universal remote codes for the TCL TV brand.

To program the control, it will scan one TCL TV universal remote control code at a time for the right code that will function with your universal remote.

You may program your TCL TV universal remote without codes by following these steps:

Step 1

Turn on the smart TV you want your universal remote to control.

Step 2

Switch on the universal remote control, then press and hold the TV, DVD, CBL, and OK/SEL buttons for 2-3 seconds.

Your smart device will be ready to program when the LED light turns on.

Step 3

Directly aim your universal remote at the smart device.

Step 4

 Select “CH-” and “CH+” from the menu. An on/off signal will be indicated by your universal remote.

Step 5

 Keep pressing the Up or Down buttons to turn off your smart device.

Step 6

 Press the Power key to verify the remote code. Your mobile device ought to start up.

Once the TV is on, try switching the channels to see if the universal remote is properly programmed.

Step 7

To save the universal remote code, press the Device button.

Your smart device’s LED will blink twice to signal that the code was properly stored.

How to Program Your TCL TV Universal Remote With Manual Method

The universal remote control for the TCL TV can be programmed using the keycode as well. Your smart device’s model and make are identified by the keycode.

Here’s how to go about it;

Step 1

Turn on your smart device

Step 2

 Press the TVL TV universal remote control’s TV button.

Step 3

Press and hold your universal remote’s Setup button until you see the LED light flash. This shows that the mode of learning is learning.

Step 4

 Enter the keycode that you were able to find in the programming manual.

Step 5

Directly point your universal remote to the TV.

Step 6

On your universal remote, press and hold the Power button.

Step 7

When the TV screen turns off, release the Power button.

All you have to do is do that. Now your universal remote will work properly with your smart TV. Repeat the previous instructions using a different code if your universal remote and smart device are not functional.

Additionally, you can program your universal remote to “search mode.” It’ll look for the right code.

Using this, you can;

Step 1

 Turn on your smart device.

Step 2

 On the universal remote, press and hold the Setup button.

Step 3

 Key in the three-digit code (9-9-1).

Step 4

Press the CH+ button after pressing the Power button on your universal remote control to turn off your smart TV.

Your universal remote should operate properly after performing the previously mentioned procedures.

If none of the methods above are successful, you can also try using an Alexa device or your phone to control your TCL TV.

You can easily program your TCL TV universal remote control using the methods listed above. If your smart device and universal remote don’t cooperate, try again with alternative codes, check that your remote is compatible, or get help from customer care.

Troubleshooting Tips

Certainly, here are some universal remote codes for TCL TVs, followed by troubleshooting tips that you can include in your blog:

Universal Remote Codes for TCL TV: Here are some common universal remote codes that might work with TCL TVs:

  • 12049
  • 11756
  • 11781
  • 12290
  • 10885
  • 11749

Please note that these codes may vary depending on the model and brand of your universal remote. It’s recommended to consult your universal remote’s manual for specific code entry instructions.

Troubleshooting Tips for TCL TV Remote Issues:

  1. Remote Not Working:
    • Check batteries: Ensure the batteries in the remote are fresh and properly inserted.
    • Re-pair remote: Some remotes require re-pairing with the TV. Follow the pairing instructions in your TV’s manual.
  2. Programming Issues:
    • Correct code: Double-check that you’ve entered the correct code for TCL TVs. Try different codes if needed.
    • Reset remote: If programming fails, reset the remote and start the process again.
  3. Inconsistent Functionality:
    • Mode button: Ensure the remote is in the correct mode (TV mode) when using it with the TCL TV.
    • Direct line of sight: Point the remote directly at the TV’s sensor to avoid signal interference.
  4. Remote Buttons Not Working:
    • Clean remote: Dust or debris might affect button functionality. Gently clean the remote’s surface.
  5. TV Not Responding to Remote:
    • Power cycle TV: Turn off the TV, unplug it from the power source, wait a few minutes, and then plug it back in.
  6. Universal Remote Compatibility:
    • Check compatibility: Ensure your universal remote is compatible with TCL TVs. Some remotes may not support all features.
  7. Remote Signal Weakness:
    • Replace batteries: Weak batteries can result in a weak remote signal. Replace them with fresh ones.
  8. TV Firmware Update:
    • Update TV firmware: Check TCL’s official website for firmware updates that might resolve remote-related issues.
  9. Obstruction Issues:
    • Remove obstructions: Ensure there’s nothing blocking the line of sight between the remote and the TV’s sensor.
  10. Contact Support:
    • Manufacturer support: If issues persist, contact TCL’s customer support for specific troubleshooting guidance.

Remember to provide clear instructions for each troubleshooting tip and encourage readers to refer to their universal remote and TV manuals for detailed information.

Leave a Comment