Apex DVD Player Universal Remote Codes

Hello! I’m here to assist you. If you’re in search of Apex DVD Player Universal Remote Codes, you’ve come to the right place. In this article, you’ll find the essential codes to program your Apex DVD remote. We’ve compiled a comprehensive list of universal Apex DVD remote codes that cover various brands and models, simplifying the programming process.

Once you’ve selected the right code, setting up your universal remote becomes a breeze. Say goodbye to the inconvenience of juggling multiple remotes and embrace the ease of using Apex universal codes and setup instructions to control your devices.

Apex DVD Universal Remote Codes List

Check out the Apex DVD universal remote codes list and choose the specific code that matches the brand and model of your device if you want to start configuring the device. There are several codes available for selection.

 If you’ve input an invalid code, try again until you’re successful. The entire list of Apex DVD codes is shown below:

Apex DVD Player Universal 3 Digit Remote Codes

654, 655, 743, 744, 757, 386, 390, 391, 392, 401, 424, 430, 436, 439, 445, 457, 459, 372, 373, 374, 081, 082, 084, 087

Apex DVD Player Universal 4 Digit Remote Codes

  • 2316
  • 2229
  • 2001
  • 2057
  • 2098
  • 2095
  • 2262
  • 2250
  • 2061

Apex DVD Player Universal 5 Digit Remote Codes

50402, 52405, 53702, 54202, 56107, 58404, 59407, 59603, 50219, 50611, 51016, 52310, 52418, 54019, 56711, 58233, 58939

How to Program Apex DVD Universal Remote

Apex DVD remote control codes are important for setting up the desired device. It would be difficult to program the Apex DVD universal remote without the code. If you already have the special code required, you may start the setup process according to the simple steps we have prepared for you. To program the Apex DVD remote control, adhere to the procedures listed below:

Read Also: Sharp DVD Universal Remote Codes

How to Program Apex DVD Universal Remote Without Codes

All universal remote control codes are scanned into the remote during the auto-search procedure. To program the control, it scans one code at a time to find the right remote code that works with your remote. Follow the guidelines below:

  • Turn on the smart device you wish to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is ready to program, according to the LED light.
  • Use the remote to choose the “CH+” and “CH-“ switches. 
  • On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  • Click the “power” key to confirm the code. It should start up. If it does, check a different channel to ensure the remote is programmed correctly.
  • To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was saved.

How to Program Apex DVD Universal Remote With Manual Method

The universal remote may be easily programmed using the keycode, which also helps identify the make and model of your equipment.

  • You must first “Turn The Device On.”
  • On your “Apex DVD universal remote,” choose “TV.”
  • In order to put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  • At last, key in the “Keycode”  which you collected from the programming manual (Instructions Booklet)
  • Just “point your remote at the TV” after completing this step, and then press and Hold The Power” button.
  • When the screen switches off, you can release the “Power Button.”

That’s all there is to it; your TV should now work perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

  • You can put your universal remote in search mode and look for the right key code if you are unable to find it at that moment. The remote control is forced into search mode by a code in the instructions.
  • “Turn The Device On” first.
  • Hold down the “Setup” button for a moment.
  • EnterĀ the “9-9-1” (three-digit) code, after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel Up button until the device, in this case, your TV, “Turns Off.”

Finding your key code may take a little more time using the above method, but it is very important. Your remote should function properly for all in-room functions once you have completed the above steps.


Please provide us with your feedback on this topic. Have you successfully completed the setup procedure by entering the correct code? Please let us know which codes have worked with which devices. Keep coming back to our website to learn more about additional codes if you have more universal remote controls that need to be programmed.

Troubleshooting Tips

Absolutely, troubleshooting can be a lifesaver when technical issues arise. Here are some practical troubleshooting tips to help you address common problems with your Apex DVD Player:

  1. Remote Control Problems: If your remote isn’t responding, start by checking the batteries. Ensure there’s a clear line of sight between the remote and the player, and eliminate any potential sources of interference.
  2. Disc Playback Issues: When facing playback problems, examine the disc for dirt, scratches, or smudges. Gently clean it with a soft cloth. If the issue persists, try other discs to determine if it’s a player-related issue.
  3. Power Challenges: Confirm that the power cable is properly connected to both the player and the power source. Ensure the player’s power switch is in the “on” position.
  4. Audio and Video Glitches: If you’re experiencing audio or video disturbances, verify that cables are securely connected to both the player and the TV. Consider trying different cables or ports.
  5. Frozen or Unresponsive Player: For a frozen player, unplug it from the power source for a few minutes and then plug it back in. This can often reset the player and resolve minor glitches.
  6. Remote Programming Difficulties: If programming the universal remote proves challenging, consult the remote’s manual for accurate instructions. Make sure you’re using the correct Apex DVD Player code.
  7. Unusual Noises: Unusual sounds from the DVD drive could indicate mechanical issues. If the noise persists, contacting customer support or a technician might be necessary.
  8. Subtitles and Audio Tracks: For subtitle or audio track problems, ensure that the disc supports these features. Adjust settings both on the player and within the disc’s menu.
  9. Internet Connectivity: If your player connects to the internet, verify the network connection and settings. Reboot your router if needed.
  10. Factory Reset: As a last resort, consider a factory reset (consult the manual). Remember, this will erase custom settings


What is the RCA universal remote code for the Apex DVD player?

The Universal Remote Control Code For RCA Apex TV isĀ 1236, 1241, 1287, and 1376. You can also check out these codes.

How do I find the code for my universal remote?

Locate the model and code list version by looking inside the battery compartment under the batteries or on the underside of the compartment cover.
Identify and make note of the code list version (CL3, CL4, CL5, or CL6), then replace the batteries and/or compartment cover.

Leave a Comment