GE DVD/VCR Combos Universal Remote Codes

Welcome to our comprehensive guide on universal remote codes for GE DVD/VCR combo units! Owning a combination DVD and VCR player offers the versatility of playing both modern and classic media, but handling multiple remotes can be a hassle. That’s where universal remotes come in handy, allowing you to streamline control and simplify your entertainment experience. If you’re looking to program your universal remote to work seamlessly with your GE DVD/VCR combo, you’re in the right place.

In this guide, we’ll explore the codes and steps you need to sync your remote, giving you convenient access to all your favourite movies and recordings. Say goodbye to remote clutter and hello to a more enjoyable viewing experience – let’s dive into the world of GE DVD/VCR combo universal remote codes.

GE DVD/VCR Combos Universal Remote Codes List

DVD/VCR ComboCode
ALLEGRO6540 6127 6312
BROKSONIC6541 6226
DURABRAND6127 6312
FISHER6135 6327
GO-VIDEO6129 6142 6166 6230
INSIGNIA6127 6312 6031
JVC6050 6178
LG6113 6031 6546
MAGNAVOX6530 6189 6408 6228
NEXXTECH6112 6260 6161 6431
PANASONIC6090 6544
PHILIPS6228 6408 6189
RCA6130 6321
RIO6127 6312
SAMSUNG6166 6066
SANYO6135 6327
SYLVANIA6168 6168 6384 6022
SYMPHONIC6168, 6022, 6384
TOSHIBA6123 6492 6516
ZENITH6127 6312

How to Program GE Universal Remote Without Codes

All universal remote control codes are scanned into the remote during the auto-search procedure. To program the control, it scans one code at a time to find the correct remote code that works with your remote. Observe the directions below:

  • Turn on the smart device you want to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is ready to program, according to the LED light.
  • Use the remote to choose the “CH+” and “CH-” switches.
  • On/off indications are displayed on the remote. Press the “up” or “down” key until the device turns off.
  • Click the “power” key to confirm the code. It should start up. If it does, check a different channel to make sure the remote is programmed properly.

To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was saved.

Read Also: dvd universal remote 4 digit codes

How to Program GE Universal Remote With Manual Method

The universal remote may be easily programmed using the keycode, which also helps to identify the manufacturer and model of your equipment.

  • You must “Turn The Device On”.
  • Press “TV” on your “GE universal remote”.
  • As soon as the universal remote displays the “Light Flash” (a sign that it is in “Learning mode”), push and hold the “Setup button” for a few seconds.
  • Finally, input the “Keycode” that you received from the Instructions Booklet for programming.
  • Simply “point your remote at the TV” after completing this step, and then press and Hold The Power” button.
  • When the screen switches, you can release the “Power Button.”

That’s all there is to it; your TV should now work flawlessly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

You can put your universal remote in search mode and look for the right key code if you are unable to find it at that moment. The remote control is forced into search mode by a code in the instructions.

  • “Turn The Device On”.
  • Hold down the “Setup” button for a moment.
  • Enter the “9-9-1” (three-digit) code, after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel Up button until the device, in this case, your TV, “Turns Off.”

Finding your key code may take a little more time using the above method, but it is essential. Your remote should function properly for all in-room functions once you have completed the above steps.

Troubleshooting Tips

Encountering issues with your GE DVD/VCR combo and universal remote setup? Don’t worry – here are troubleshooting tips to help you resolve common problems:

  1. Power Check: Ensure your DVD/VCR combo unit and universal remote have sufficient power. Replace the batteries if needed.
  2. Code Accuracy: Double-check the remote codes you’ve entered. Incorrect codes can prevent proper communication.
  3. Programming Steps: Follow the correct programming steps provided in the remote’s manual. Skipping or missing steps can lead to issues.
  4. Combo Compatibility: Confirm that your universal remote is compatible with your specific GE DVD/VCR combo model.
  5. Obstructions: Make sure there are no objects blocking the line of sight between the remote and the combo unit.
  6. Signal Range: Stay within the recommended range when using the remote. Being too far can result in weak signals.
  7. Interference: Keep away electronic devices that might interfere with the signals, such as routers or cordless phones.
  8. Remote Damage: Inspect the remote for physical damage. Any cracks or damage might affect its functionality.
  9. Factory Reset: If issues persist, consider performing a factory reset on both the combo unit and the remote, following the user manuals.
  10. Software Updates: Check for firmware updates for both the combo unit and the remote. Outdated software can cause compatibility problems.
  11. Remote Configuration: Some universal remotes require manual configuration. Make sure the remote is set to the appropriate mode for controlling both DVD and VCR functions.
  12. Customer Support: If troubleshooting doesn’t work, contact the manufacturer’s customer support for assistance or consult online forums for similar issues.

By following these troubleshooting tips, you’ll be better equipped to identify and resolve issues with your GE DVD/VCR combo and universal remote setup. Patience and careful attention to detail often lead to successful solutions


However, finding out the working GE DVD/VCR Combo Universal Remote Codes isn’t so simple.

So I think that after reading this essay, you may easily program your universal remote without any problem.


Can you use a universal remote on a VCR DVD player?

To improve your watching experience, use the RCA universal remote control with virtually any TV, DVD player, VCR, or cable box. One may be useful if you misplaced your primary remote, are putting up a home theatre, or want a backup remote for your living room.

How do I program my GE universal remote to my DVD player?

Hold the “Setup” button for a few seconds until the indicator light turns “RED”. Press the coordinating device button, such as “TV,” “DVD,” or “AUX.” Enter the ge universal remote codes ( It can be either 3 digits or 4 digits). If the code entered is correct, then the red indicator light will turn “OFF”.

Leave a Comment