How To Program A Magnavox Universal Remote? 5 Easy Steps

Hey, are looking for the easiest way to Program Your Magnavox Universal Remote? This article will include step-by-step instructions on how to program your remote so that it operates at its full potential.

Programming a remote is not as hard as it may seem! Follow these step-by-step instructions for programming your own universal remote, and you’ll have the remote programmed in no time. So, let’s get started.

How To Program A Magnavox Universal Remote
How To Program A Magnavox Universal Remote?

Why Would I Need to Program My Remote?

There are many reasons why you need to learn How to Program a Magnavox Universal Remote. For example, some people might want to be able to control their home entertainment system from anywhere in the house. Or, they may want to be able to control other devices with their Magnavox Universal Remote. In this guide, we will walk you through the steps needed to program your Magnavox Universal Remote.

How To Program A Magnavox Universal Remote?

There are a few different ways to program your Magnavox Universal Remote. Some methods are more user-friendly than others, but all require a bit of patience and some basic knowledge about the remote.

One way to program a universal remote is by using the device code. This means that you need to look up the code for each device and enter it into the corresponding device. This can be time-consuming, especially if you have a large collection of remotes.

Another way to program a universal remote is by using the code search method. With this approach, your universal remote will search for available codes for your device and automatically enter them into the correct box. However, this method can sometimes struggle with difficult buttons or obscure codes.

If you don’t have codes for Magnavox Universal Remote. You can follow this auto-search method. So, here are the steps that you should follow:

Press the TV/DVD/VCR and SELECT on the remote.

Press the Power button to enter the code search mode.

After following the steps, if your device is turned off it means the Magnavox remote has been programmed successfully!

Program Using Device Code

In this method, you have to first get the code for your device and then start programming it. Here are the step-by-step instructions for this method:

Step 1:

Turn on the device, and make sure the batteries are working in the remote.

Step 2:

Hold both the TV and SEL buttons simultaneously for 3 seconds.

Step 3:

Point the remote toward the device and enter the 3, 4, or 5-digit code.

Step 4:

Now press the VOLUME + button to increase the volume.

Step 5:

If it works accordingly press the TV button to store the code.

Which Devices I Can Control With Magnavox Universal Remote?

You can use Magnavox Universal Remote to control many devices in your home. You can use the remote to turn on and off lights, change the channel on your TV, and more. The following are some of the devices that you can control with a Magnavox Universal Remote:

  • TVs
    DVD/Blu-ray players
    Cable boxes
  • Auxiliary Systems

The Magnavox Universal Remote is compatible with many different brands of TVs and DVD/Blu-ray players. Just make sure that the device is supported by the Magnavox Universal Remote and that it has an IR port.

Common Issues with Programming Your Universal Remote

While programming Magnavox Universal Remote, there are some common issues you may face. First, make sure the remote is turned on and in the range of your TV. If not, you can try to connect it to your TV using the included IR blasters.

Next, find the “Universal Remote Control” programming mode on your remote. To do this, press and hold down both the “TV” and “DVD/VCR” buttons for about two seconds until the green light on the back of the remote starts to flash. Then release both buttons.

If you still cannot get your remote into programming mode, try these other tips: Make sure your batteries are fresh; try recharging your battery; clean off any dirt or dust from around the infrared receiver; place your remote as far away from other electronic devices as possible when trying to program it; resetting (unplugging) your TV and then re-plugging it back in may help; if nothing else works, bring in an expert to help!


As you have seen, in this article, we have outlined methods to Program a Magnavox Universal Remote. If you are looking for an easy way to control your home entertainment system, then this guide is for you! We wrote it in the most and easiest-to-digest way possible so everyone can understand and benefit from it! We have walked through each step of the process so that by the end of it, we are sure you have a functional remote control. So, be sure to read all the way through before beginning!

Leave a Comment