Magnavox DVD Player Universal Remote Codes

Hey, how are you doing? Are you looking for  Magnavox DVD Player Universal Remote Codes? Do you want to know how to program Magnavox DVD Player Universal Remote Codes for your device? No need to worry about it! Fortunately, you are in the right place.

Magnavox is now one of the most reliable brands of universal DVD remotes. By using certain Magnavox DVD universal remote codes, this may be easily programmed with a variety of devices. The procedure for programming a Magnavox DVD player and other devices proceeds successfully after the exact codes are entered.

In that case, you will surely appreciate how easy it is to control several devices with a single Magnavox DVD remote. To learn the codes and instructions you need to program the Magnavox DVD remote, see the page below.

Magnavox DVD Player Universal Remote Codes

One of the well-known DVD player makers on the market is Magnavox. A Magnavox DVD player typically includes a remote control. But, you may program your DVD using a universal remote if for some reason you lose the remote control for your Magnavox DVD player or it becomes damaged.

Magnavox DVD Universal Remote Codes List

Brand NameRemote Codes
Apex Digital0405, 0437, 0442
Bel Canto Design0456
Blue Parade0411
California Audio Labs0406
Craig0438, 0412, 0413, 0414, 0415
CyberHome0433, 0444
Daewoo0440, 0446
Denon0406, 0466, 0517
Diamond Vision0450
Disney0427, 0449
GE0400, 0528
Go Video0529, 0429, 0430, 0440
GoldStar0430, 0440
Hello Kitty0438
Hitachi0408, 0531
Insignia0427, 0462, 0471, 0477, 0499, 0507
Integra0411, 0532, 0463
JVC0527, 0439, 0445, 0457, 0469, 0509
Kenwood0406, 0526
LG0430, 0440, 0457, 0515, 0504
Magnavox0407, 0522, 0525, 0427, 0452, 0454, 0513
Memorex0428, 0438, 0449, 0464, 0508
Mitsubishi0409, 0410
Onkyo0407, 0532, 0463, 0506
Panasonic0406, 0407, 0458, 0459, 0510
Philips0407, 0522, 0523, 0524, 0525, 0427, 0448, 0452, 0454, 0472, 0512
Pioneer0411, 0423, 0426, 0456, 0473, 0519
Polaroid0442, 0450
Polk Audio0522
RCA0400, 0411, 0436, 0464
Samsung0406, 0408, 0424, 0435, 0461, 0470, 0475, 0503, 0505
Sharp0530, 0427, 0431, 0465, 0502
Sonic Blue0440
Sony0401, 0402, 0403, 0404, 0432, 0443, 0453, 0455, 0501
Theta Digital0411
Toshiba0407, 0428, 0460, 0467, 0478, 0500
Urban Concepts0407
Yamaha0406, 0522, 0525, 0425, 0434, 0521
Zenith0407, 0430, 0440

Magnavox DVD codes are always available since we have a detailed list of almost all home entertainment systems. Keep in mind that some types of devices require specific Magnavox DVD remote codes. When looking for the ideal Magnavox universal remote codes for DVD players and other devices, you must examine them carefully. From the list below, select the ideal code for your device:

3 Digit Code for Magnavox DVD Player


Magnavox DVD 4 Digit Remote Control Codes for DVD Player

Get Magnavox Universal Remote Codes for DVD Player here:


How to Program Magnavox DVD Universal Remote

When you set your Magnavox DVD remote to work on multiple devices, you are making the right choice. This is a great method to update your home entertainment system while also giving you the maximum amount of convenience.

To successfully program the Magnavox DVD universal remote, follow the steps listed below:

How to Program Magnavox DVD Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to find the right remote code that works with your remote. Follow the guidelines below:

  • “Turn on” the smart device you want to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is ready to program, according to the LED light.
  • Use the remote to choose the “CH+” and “CH-“ switches. 
  • On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  • Click the “power” key to confirm the code. It should start up. If it does, check a different channel to make sure the remote is programmed properly.
  • To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was saved.

How to Program Magnavox DVD Universal Remote With Manual Method

The universal remote may be readily programmed using the keycode, which also works to identify the make and model of your equipment.

  • You must first “Turn The Device On.”
  • On your “Magnavox DVD universal remote,” choose “TV.”
  • In order to put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  • At last, key in the “Keycode” you collected from the programming manual (Instructions Booklet)
  • Just “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  • When the screen switches off you can release the “Power Button.”

That’s all there is to it; your TV should now operate perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

You can put your universal remote to search mode and look for the right key code if you are unable to discover it at that moment. The remote control is forced into search mode by a code in the instructions.

  • “Turn The Device On”.
  • Hold down the “Setup” button for a moment.
  • Type the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”

Finding your key code may take a little more time using the above method, but it is very important. Your remote should function properly for all in-room operations once you have completed the above steps.

Troubleshooting Tips

To program a universal remote control for a Magnavox DVD player, you’ll need the correct remote control codes and follow the programming instructions. Here are the steps to program a universal remote and some troubleshooting tips:

Step 1: Find the Correct Remote Control Codes

  1. Look up the Magnavox DVD player’s remote control codes. These codes can usually be found in the remote control’s manual, on the manufacturer’s website, or in the universal remote’s documentation.

Step 2: Program the Universal Remote

  1. Turn on your Magnavox DVD player manually.
  2. Press and hold the “Setup” or “Code Search” button on your universal remote until the indicator light (usually LED) comes on.
  3. Enter the first code for Magnavox DVD players using the remote’s number keypad. The indicator light should turn off if the code is accepted. If not, try the next code.
  4. Once the correct code is entered and accepted, test the remote’s functionality by trying to play, pause, stop, or eject a disc.

Step 3: Troubleshooting Tips

If your universal remote isn’t working correctly with your Magnavox DVD player, try the following troubleshooting tips:

  1. Try Other Codes: Sometimes, the first code you try may not work. Repeat the programming steps using different codes for Magnavox DVD players until you find one that works.
  2. Batteries: Ensure that your universal remote has fresh batteries. Weak batteries can cause intermittent problems or lack of response.
  3. Distance and Angle: Point the remote directly at the DVD player and ensure there are no obstacles blocking the signal. Make sure you’re within a reasonable range (usually within 20 feet).
  4. Programming Errors: If you made a mistake while entering the code or didn’t follow the programming instructions correctly, reset the remote by removing the batteries for a few minutes and then try the programming steps again.
  5. Compatibility: Not all universal remotes are compatible with all DVD players. Ensure that your remote is compatible with Magnavox DVD players.
  6. Resetting the DVD Player: If the DVD player is not responding to any remote, you can try a factory reset on the DVD player itself. Consult your DVD player’s manual for instructions on how to do this.
  7. Check for Infrared Interference: Strong sources of infrared light, such as direct sunlight or other remote-controlled devices, can interfere with the signal. Make sure there are no such sources nearby.
  8. Update the Remote: Some universal remotes can be updated or reprogrammed using a computer and software provided by the manufacturer. Check the manufacturer’s website for any available updates.
  9. Replace the Remote: If you’ve exhausted all troubleshooting options and the remote still doesn’t work, you may need to consider replacing it with a compatible remote for your Magnavox DVD player.

Remember to consult the user manuals provided with both the universal remote and the Magnavox DVD player for specific instructions and troubleshooting guidance tailored to your devices.


How did you find this post? Was it useful for setting up your Magnavox DVD remote? Please elaborate on the code you used and which device it matched. Your feedback on working with us is always welcome. Please feel free to offer comments or recommendations in the area given below.


How to check if a Magnavox remote control is a universal remote

Certain Magnavox DVD remote controls are universal remote controls. This means that devices other than the Magnavox DVD player can be powered using the remote. If your Magnavox remote offers the “Set” and “Mode” choices, it is likely a universal remote. It is a universal remote if it does.

How do I program my one-for-all universal remote to my DVD player?

Turn on a desired device (e.g., VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). …
On the remote control, press a device key once (i.e., DVD/VCR, CBL/SAT, or TV). …
Press and hold SET until the LED (red light) blinks twice, then release SET.

Leave a Comment