Spectrum DVD Player Universal Remote Codes

Struggling to locate the perfect universal remote control codes for your Spectrum DVD player? No need to fret, as this page has you covered with all the essential codes and programming instructions to link your beloved devices to your Spectrum DVD remote. It’s a simple process – just select the audio or video device you want to sync with your Spectrum DVD remote.

We’ve compiled an extensive list of DVD remote codes designed for Spectrum. All you have to do is input the right code to sync your device with the Spectrum DVD universal remote. Say goodbye to the hassle of juggling multiple remotes and simplify your entertainment experience.

Spectrum DVD Universal Remote Code List

You can choose a specific code from our list to program the Spectrum DVD universal remote control for any device. Additionally, make sure to look through the entire list of 4-digit Spectrum universal remote codes for DVDs that you might require.

Find the exact code for the device type you want to use with the Spectrum DVD universal remote:

Spectrum DVD Universal Remote Codes

Brand NameDVD Codes
LG350, 057, 074, 091
Magnavox066, 096
Panasonic144, 150, 285, 138, 042
Philips066, 276, 317, 344
RCA027, 307
Samsung070, 380, 275, 165, 159, 137
Sony033, 241, 378, 242, 191, 001, 363, 286, 243, 340, 368, 343, 351, 145
Toshiba035, 356, 164, 141, 273, 130, 188

Spectrum DVD/Blu-Ray Universal Remote Codes

Brand NameDVD/Blu-Ray Codes
Panasonic346, 285
Sony340, 286

How to Program Spectrum DVD Universal Remote

If you want to use the Spectrum DVD universal remote to control different devices, there are some actions you must take. As mentioned, DVD remote codes for Spectrum are necessary for programming.

To successfully program the Spectrum DVD universal remote, please follow the instructions below:

How to Program Spectrum DVD Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to find the correct remote code that works with your remote. Follow the instructions below:

  • Turn on the smart device you want to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is ready to program, according to the LED light.
  • Use the remote to select the “CH+” and “CH-“ switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  • Click the “power” key to confirm the code. It should start up. If it does, try a different channel to ensure the remote is programmed correctly.
  • To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

How to Program Spectrum DVD Universal Remote With Manual Method

The universal remote may be easily programmed using the keycode, which also helps to identify the make and model of your equipment.

  • You must “Turn The Device On”.
  • Press the “TV” button on your “Spectrum DVD universal remote”.
  • As soon as the universal remote displays the “Light Flash” (a sign that it is in “Learning mode”), push and hold the “Setup button” for a few seconds.
  • Finally, enter the “Keycode” that you have obtained from the Instructions Booklet for programming.
  • Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  • When the screen switches off, you can release the “Power Button”

That’s all; your TV should now work perfectly with the universal remote control. If it doesn’t, try repeating the process with a new code from the same section of the reference table.

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.

  • “Turn The Device On”.
  • Hold down the “Setup” button for a moment.
  • Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case your TV, “Turns Off.”

Finding your key code may take some more time using the above method, but it is very important. Your remote should function properly for all in-room functions once you have completed the previously mentioned steps.


If you are experiencing trouble using one of the codes listed above, we are always adding new ones to the list. If you have the correct code for the desired device you want to program with the Spectrum universal remote, send us an email instead. Please feel free to remark below.

Troubleshooting Tips

Certainly, here are some troubleshooting tips to help you navigate issues with Spectrum DVD player universal remote codes:

  1. Check Batteries: Start with the basics. Ensure the batteries in your universal remote are fresh and properly inserted. Weak batteries can lead to connectivity problems.
  2. Line of Sight: Make sure there’s a clear line of sight between the remote and your DVD player. Obstacles can block the remote’s signal and hinder its effectiveness.
  3. Code Entry Accuracy: Double-check that you’ve entered the correct code for your Spectrum DVD player. Refer to the manual or Spectrum’s official website for the accurate code.
  4. Device Mode: Confirm that your remote is set to the appropriate device mode for controlling the DVD player. It should be in the DVD mode.
  5. Code Testing: Use the code testing method. Enter a code and test if the remote effectively controls the DVD player. If not, try different codes until you find the one that works.
  6. Reprogramming: If your remote isn’t functioning as expected, consider reprogramming it. Follow the instructions in the manual to reset and reconfigure the remote for your DVD player.
  7. Factory Reset: If issues persist, perform a factory reset on your universal remote. This can resolve configuration problems. Refer to the manual for the reset process.
  8. Interference Factors: Electronic devices emitting signals, such as Wi-Fi routers, can interfere with remote signals. Temporarily turn off or relocate such devices to see if they improve remote functionality.
  9. Update Firmware: Check if there’s a firmware update available for your remote. Updated firmware might address compatibility issues or enhance performance.
  10. Contact Support: If troubleshooting proves challenging, don’t hesitate to reach out to Spectrum’s customer support or visit their website for assistance. They can provide specialized guidance for more complex issues.

These troubleshooting tips should help you address common problems and improve your experience with Spectrum DVD player universal remote codes.


How do you set the spectrum?

Connect your Coax Cable to your receiver and the other end to the cable outlet.
Connect the HDMI Cable to your receiver and the other end to your TV.
Connect the Power Cord to the receiver and to the electrical outlet. …
Insert batteries into your Remote.

Can I use my phone as a remote for my DVD player?

Download a TV remote app like AnyMote Smart IR Remote if your phone has an IR blaster. In addition to controlling your TV, it can also operate set-top boxes, DVD and Blu-ray players, stereo equipment, and even some air conditioners.

Leave a Comment