Universal Remote Control Codes For Aiwa TVs | Updated 2023

Universal Remote Control Codes For Aiwa TVs

Introducing the Ultimate Guide to Universal Remote Control Codes for Seamless TV Control! Are you tired of juggling multiple remotes for your entertainment setup? Look no further! Our blog is here to simplify your life by providing a comprehensive list of Universal Remote Control Codes specifically designed for Aiwa TVs. Say goodbye to remote control clutter and hello to hassle-free programming.

We’ll walk you through step-by-step instructions, troubleshooting tips, and more to unlock the full potential of your universal remote. Get ready to enhance your TV-watching experience and embrace the convenience of a single remote to rule them all. Let’s dive in!

Aiwa TV’s Universal Remote 3 Digit Codes

  •   064
  •   192
  •   402
  •   185
  •   037
  •   109
  •   039

TV’s Universal Remote 4 Digit Codes

3512, 1505, 0701, 1916, 1908, 0705, 0195, 0196, 0227, 0269, 0411, 0651, 0931, 1411, 4731, 4801, 1155, 1164, 1488, 1512, 1034, 1036, 0121, 0221, 0324, 0528, 5011, 5295, 5296, 5309, 1032, 1236

Aiwa TV’s Universal Remote 5 Digit Codes

  • 11362 
  • 10701
  • 11914 
  • 10032 
  • 11916 
  • 17342
  • 14102
  • 16507
  • 19307
  • 14118
  • 18041
  • 12248
  • 12270

Philips Universal Remote Codes For Aiwa TV

  • 0121
  • 0221
  • 0324
  • 0528

GE & One-For-All Universal Remote Codes For Aiwa TV

  • 0196
  •  0195
  • 0227
  •  0269

RCA Universal Remote Codes For Aiwa TV

  •  1036
  •  1032
  •  1236
  •  1362
  •  11362

How To Program Aiwa TV Universal Remote?

We have mentioned four methods to set up your Aiwa remote with your favourite universal remote, you need to get the code from the above list and enter that code as we said in the below procedures.

Read Also: how to program onn remote without code

First Method

  • The first method is the one you should use; if it doesn’t work, use the other usual procedures that are listed below.
  • Press and hold the “Clear TV button” continuously until all “Four Lights Illuminate.”
  • You must “Select The Code” here.
  • Now, simply hit the “Pound” button once.
  • When your “TV Turns Off,” you must press and release the “Red Power Button.”

Aiwa TV Universal Remote Without Code

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to determine the correct remote code that works with your remote. Observe the directions below:

  • Turn on the smart device you want to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to program, according to the LED light.
  • Use the remote to select the “CH+” and “CH-“ switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” keys until the device turns off.
  • By pressing the “power” key, you can confirm the code. It should start up. If it does, try a different channel to make sure the remote is programmed properly.
  • To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.

Aiwa TV Universal Remote With Manual Method

The universal remote may be readily programmed using the keycode, which also serves to identify the make and model of your equipment.

  • You must “Turn The Device On” first.
  • Press the “TV” button on your “Aiwa TV universal remote”
  • As soon as the universal remote displays the “Light Flash” (a sign that it is in “Learning mode”), push and hold the “Setup button” for a few seconds.
  • Finally, enter the “Keycode” that you have obtained from the Instructions Booklet for programming.
  • Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  • When the screen dims, you can let go of the “Power Button”.

That’s all there is to it; your TV should now operate perfectly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.

  • “Turn The Device On” first.
  • Hold down the “Setup” button for a moment.
  • Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case your TV, “Turns Off.”

Finding your key code may take a little more time using the above method, but it is very essential. Once you’ve followed the steps above, your remote control should function.

Troubleshooting Tips

Troubleshooting Tips for Universal Remote Control Codes:

  1. Verify Correct Code: Double-check the code you entered for your Aiwa TV to ensure it matches the correct model. Incorrect codes won’t work.
  2. Re-Programming: If the remote fails to control the TV, re-program it using the Auto Search or Manual Code Input method, as errors can occur during initial programming.
  3. Check Batteries: Ensure the remote’s batteries are fresh and correctly inserted, as weak or incorrectly placed batteries can lead to connectivity issues.
  4. Clear Line of Sight: Remove any obstructions between the remote and the TV’s infrared receiver to ensure proper communication.
  5. Distance and Angle: Point the remote directly at the TV and ensure you’re within a reasonable distance for optimal signal transmission.
  6. Factory Reset: If the remote behaves erratically, perform a factory reset to clear previous settings and start afresh.
  7. Remote Compatibility: Ensure your universal remote is compatible with Aiwa TVs. Not all remotes work with all models.
  8. TV Functionality: Confirm that your Aiwa TV is functioning correctly, as remote control issues can sometimes be related to the TV itself.


You won’t need to worry about the setup process once you’ve programmed your TV remote using the universal remote and the aforementioned codes; all you have to do is use it and watch the TV shows. Hope it was enjoyable.


Are there any distance limitations for the universal remote to work with my Aiwa TV?

The remote’s range is typically within 15 to 20 feet, but it may vary depending on the specific environment and the TV’s IR receiver sensitivity.

How can I reset my universal remote if it’s not functioning correctly?

Usually, a factory reset can be performed by following the instructions in the remote’s user manual. This will restore the remote to its default settings and resolve most issues.

Leave a Comment