COBY TVs Universal Remote Control Codes | Updated 2023

COBY TVs Universal Remote Control Codes

Introducing the ultimate solution for effortless control over your COBY TV – the Universal Remote Control Codes! If you’ve ever struggled with managing multiple remote controls for various TVs, fret no more. A universal remote control is a game-changer that offers unmatched convenience and versatility. In this blog session, we’ll guide you through the step-by-step process of programming your universal remote to operate your COBY TV.

But first, let’s delve into the comprehensive list of working three-digit and four-digit codes. Say goodbye to remote control clutter and get ready to unlock the full potential of your COBY TV with these ingenious codes. Let’s dive in and make your TV-watching experience a breeze!

3 Digit Remote Codes for Coby TV


4 Digit Remote Codes


5 Digit Remote Codes


Magnavox Remote Codes for Coby TV


RCA Universal Remote Codes for Coby TV

23063478  1538

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to determine the correct remote code that works with your remote. Follow the instructions below:

  • Turn on the smart device you want to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to program, according to the LED light.
  • Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Press the “up” or “down” key until the device turns off.
  • Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is programmed properly.
  • To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was held.

Read Also: philips universal remote lg tv codes

How to Program Universal Remote to Coby TV Manually

The universal remote may be readily programmed using the keycode, which also serves to identify the make and model of your equipment.

  • You must “Turn on Your Device” first.
  • Press the “TV” button on your “COBY Shack universal remote”
  • As soon as the universal remote displays the “Light Flash” (a sign that it is in “Learning mode”), push and hold the “Setup button” for a few seconds.
  • Finally, enter the “Keycode” that you have obtained from the Instructions Booklet for programming.
  • Simply “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  • When the screen dims, you can let go of the “Power Button”

That’s it, if the device is suitable, the universal remote control is ready to control your TV perfectly. Also, try repeating the same operation using a new code from the same part of the reference table if your device isn’t working.

You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.

  • “Turn The Device On” first.
  • Hold down the “Setup” button for a moment.
  • Enter the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case your TV, “Turns Off.”

Finding your key code may take a little more time using the above method, but it is very crucial. Your remote should function properly for all in-room functions once you have completed those steps.

Troubleshooting Tips

Troubleshooting Tips for COBY TVs Universal Remote Control Codes:

  1. Verify Correct Code: Double-check that you’ve entered the correct three-digit or four-digit code for your COBY TV model. Incorrect codes can result in non-functional remote control.
  2. Re-Programming: If the remote control fails to operate the TV, re-program it using the Auto Search or Manual Code Input method, as there might have been an error during the initial programming.
  3. Check Batteries: Ensure the universal remote’s batteries are fully charged and correctly inserted, as weak or improperly installed batteries can lead to connectivity issues.
  4. Clear Line of Sight: Ensure there are no obstacles obstructing the line of sight between the remote and the TV’s infrared receiver, as it may hinder communication.
  5. Distance and Angle: Make sure you’re pointing the remote directly at the TV and within a reasonable distance for optimal signal transmission.
  6. Factory Reset: If the remote control behaves erratically, consider performing a factory reset to clear any stored settings and start afresh.
  7. Remote Compatibility: Confirm that your universal remote is compatible with COBY TVs. Not all universal remotes support every TV model.
  8. Check Device Compatibility: Ensure your COBY TV is functioning correctly and the IR receiver is working, as remote control issues can sometimes be related to the TV itself.
  9. Update Remote Firmware: Check if there are any firmware updates available for your universal remote, as these updates might address compatibility and performance issues.
  10. Contact Support: If all troubleshooting attempts fail, don’t hesitate to reach out to the manufacturer’s customer support for further assistance and expert guidance.


In conclusion, you can manually configure the Coby 8 in 1 universal remote using the previously mentioned codes for the Coby 5 in 1 universal remote. We sincerely hope that this article was very helpful. If you encountered any difficulties when using these methods, please let us know in the comment area below.


How do I find the correct code for my COBY TV on a universal remote?

The blog provides a comprehensive list of working three-digit and four-digit codes for various COBY TV models. You can use these codes to program your universal remote to control your TV.

How do I program my universal remote to work with my COBY TV?

To program your universal remote, you can either use the Auto Search method, where the remote automatically searches for the correct code, or the Manual Code Input method, where you enter the specific code for your TV model.

Leave a Comment