How To Program Panasonic Blu-ray Remote in 5 Easy Steps?

Hey, do you need help Programming Panasonic Blu-ray Remote? Don’t worry you are on the right page. Yes, if your Blu-ray player remote controls a Panasonic Blu-ray player, you might need to know how to program the remote. Programming a Panasonic remote sounds complicated, but it can actually be rather easy. Check out this detailed guide on how to program your Panasonic Blu-ray Remote with ease!

We’ll start by explaining what you need in order to program the remote. Then, we’ll walk you through the programming process step-by-step. We’ll also provide some troubleshooting tips in case you run into any issues.

By the end of this guide, you should be able to use your Panasonic Blu-ray remote to control your player with ease. So let’s get started!

How To Program Panasonic Blu-ray Remote
How To Program Panasonic Blu-ray Remote

How To Program Panasonic Blu-ray Remote?

Assuming you have a Panasonic Blu-ray Player and a compatible remote, you can follow these steps to get it set up. If your model isn’t listed here, try looking in the user manual or contacting customer support for help.

  1. The first step is to Turn On Panasonic Blu-ray Player.
  2. Then, Insert the batteries into the remote.
  3. Press and hold the “Setup” button until the red light on the remote blinks twice.
  4. Enter the code for your Blu-ray player using the number buttons on the remote. The code will be different depending on your model, so consult your user manual or look it up here if you’re not sure what it is.
  5. Point the remote at the Panasonic Blu-ray Player and press the “Power” button. When the screen switches off, then you can release the power button.
  6. Test out the remote by pressing some of the other buttons to see if they work properly with your Blu-ray player.

Here’s how you would set up your universal remote to search mode if the key code is incorrect. It’s a code in the manual which forces the remote into search mode.

  1. First, turn on the device.
  2. Next, press and hold the “Setup” button.
  3. Enter “9-9-1” (three digits).
  4. Finally, hold down the “Power” button on the remote and press the “Channel up” button until your device turns off.

Get Programming Codes for Panasonic Blu-ray Remote

For those of you who want to get the programming codes for the Panasonic Blu-ray remote, you can find them HERE. Once you have the code, simply follow the instructions above in this post to program your remote.

How To Program Panasonic Remote For Use With Other Products?

If you have a Panasonic DVD/Blu Ray player attached to your TV using a HDMI 1.2 or higher cable, and the Viera Link is set to On in both the TV and DVD/Blu Ray settings, you can control basic functions of the DVD with the buttons on the bottom of the remote. Your TV will be able to turn it on and off, but not other functions that require more than one button press.

Basic Functions Of the Panasonic Blu-ray Remote

If you are referring to the Panasonic DMP-BDT270 Blu-ray Player Remote, it has the following functions:

Power: turns the Blu-ray player on and off
Eject: opens and closes the disc tray
Home: takes you to the Home menu
Menu: brings up the pop-up menu
Top Menu: goes to the top menu of the current disc
Up/Down/Left/Right Arrows: navigate menus and selections on the screen
Return: goes back to the previous screen or menu
Info: displays information about the current selection on the screen
Pop-Up Menu: brings up a secondary menu (on some discs)
Repeat A-B: allows you to repeat a section of a disc (e.g., for studying a scene in a movie)
Slow Motion Playback: plays back footage at a slower speed than normal
Forward Skip/Reverse Skip: skips ahead or backward through scenes (can be held down for fast forwarding or rewinding)
Pause/Play: pauses or resumes playback

Troubleshooting Tips

If you’re having trouble programming your Panasonic Blu-ray remote, here are a few troubleshooting tips to help you out:

  • Make sure that the batteries in the remote are fresh and have plenty of power.
  • Ensure that the Blu-ray player is properly plugged into an electrical outlet and turned on.
  • If you’re using the remote to control a TV as well, make sure that the TV is on and set to the correct input.
  • Try resetting the remote by removing the batteries for a few minutes, then reinserting them.
  • If all else fails, consult the user manual for your specific model of Panasonic Blu-ray player or contact customer support.


We hope this guide has been helpful in teaching you how to program a Panasonic Blu-ray remote. If you have any additional questions, please feel free to leave them in the comments section below. We’ll do our best to answer them as soon as possible. Thanks for reading!

Leave a Comment