How To Program Vivitar Universal Remote Without Code | Updated 2023

How To Program Vivitar Universal Remote Without Code

Hello there! When you buy a brand new remote, one of the first things you’ll need to do is program it. But what if you don’t have the code? Learn how to program your Vivitar Universal Remote without code in this article!

Vivitar has a new line of universal remote controls that they’ve put some effort into designing to be easier to use. Gone are the days of having to enter an “uncode” to set up the remote control, because now you can program it by simply following the instructions below. So, let’s dive into the step-by-step process of programming your Vivitar Universal Remote hassle-free!

How To Program Vivitar Universal Remote Without Code
How To Program Vivitar Universal Remote Without Code

How To Program Vivitar Universal Remote Without Code

You can program your Vivitar universal remote by following the simplest and easiest steps below.

Auto-programming Method

You can use auto-programming method to program vivitar universal remote without codes. In this method, universal remote automatically scans for code and choose the one for your device.

  • Turn on your device( e.g. Tv, DVD player, VCR, etc.) that you want to program.
  • Press the Component button and then press the OK/SEL buttons together.
  • Keep pressing them until a flashlight glows, it means your device is ready to be programmed.
  • Now point your remote to the device and keep pressing CH+ and CH- buttons until your device turns off.
  • Now test your device and then finally save the code.

Read More: How To Program Vivitar Universal Remote: A Complete Guide

How to Check if the Remote has been Programmed correctly?

If you have programmed your Vivitar Universal Remote without a code, you can check if it has been programmed correctly by doing the following:

  1. Turn on the TV or other device that you want to test.
  2. Press and hold the “Setup” button on your remote until the red light on the remote blinks twice.
  3. Enter the code 9-9-1. The red light will blink twice again.
  4. Press the “Power” button on your remote. If the TV or other device turns off, then your remote has been programmed correctly!

How to get Codes For Vivitar Universal Remote?

If you’re inclined to program your Vivitar Universal Remote using codes, worry not, for we’ve got a solution in store. Access all the necessary codes for your Vivitar universal remote, along with comprehensive programming instructions, by simply visiting the following link: [ ]. Your path to programming success is just a click away!


Here are some handy troubleshooting tips to ensure a smooth experience when programming your Vivitar Universal Remote without a code:

  1. Check the Batteries: It might seem obvious, but sometimes the simplest solutions are the most effective. Make sure your remote’s batteries are fresh and properly inserted. Weak batteries can cause erratic behavior during programming.
  2. Line of Sight: Ensure there are no obstacles blocking the line of sight between the remote and the device you’re trying to control. Sometimes, a clear line of sight is essential for successful programming.
  3. Reset the Remote: If you encounter issues during programming, try resetting the remote control. Look for a reset button or follow the manufacturer’s instructions to perform a reset. This can often clear up any glitches or conflicts.
  4. Double-Check Device Codes: While you’re not using codes for programming, you might need to select a device type from a list during the process. Make sure you’re choosing the correct device type that corresponds to what you’re trying to control.
  5. Fresh Batteries for the Device: If you’re having trouble controlling a specific device, ensure that the device itself has fresh batteries. Some devices might not respond if their batteries are low.
  6. Clear Programming: If you’ve attempted programming multiple times and things aren’t working as expected, consider starting from scratch. Clear any existing programming on the remote before attempting the setup again.
  7. Signal Interference: Electronics and other wireless devices can sometimes interfere with remote signals. Try programming the remote in an environment with minimal electronic interference.
  8. Manufacturer Support: If all else fails, don’t hesitate to reach out to Vivitar’s customer support or consult the user manual for specific troubleshooting steps. They might have insights into common issues and solutions.
  9. Try Different Methods: Sometimes, remote programming can have various methods. If one method isn’t working, explore alternative methods outlined in the user manual or on Vivitar’s official website.

Remember, remote programming might require a bit of trial and error, but with these troubleshooting tips in your arsenal, you’ll be well-equipped to tackle any hiccups that come your way.


In conclusion, mastering the art of programming your Vivitar Universal Remote without the need for codes opens up a world of convenience and control at your fingertips. No more rummaging through manuals or scratching your head over cryptic numbers. With the step-by-step process we’ve outlined, you’re now empowered to effortlessly sync your remote with your devices.

Remember, if you encounter any bumps along the way, our troubleshooting tips are here to save the day. From checking batteries to ensuring clear lines of sight, these insights will help you navigate any obstacles and keep frustration at bay.

So, whether you’re a tech-savvy enthusiast or someone just looking to simplify their remote control experience, programming your Vivitar Universal Remote is now a breeze. With a dash of patience and a sprinkle of determination, you’re well on your way to becoming the master of your entertainment domain. Happy programming!


Why is my universal remote not programming?

However, battery problems, pairing problems, or infrared sensor problems are the most typical causes of a TV remote not working. Pointing the remote control at your TV, press the power button. On the TV, check to see if the LED indication blinks. If not, the batteries on your remote do not have enough charge.

How do I reset my universal LED remote?

Press a button to completely discharge the remote after removing a battery. Replacing the battery should cause the LED to blink twice. Within 6 seconds, concurrently press the numbers 2 and 8; the LED should then flicker twice.

How do I restore my TV to factory settings?

Switch on the TV.
On the remote control, press the HOME button.
Choose Settings.
Your TV’s menu settings will determine the subsequent steps: … Choose Reset or Factory data reset.
Choose Yes, then click Delete Everything.

Visit Also:

Leave a Comment