Memorex DVD Universal Remote Codes

Good day, and welcome to this blog! Do you want to program your Memorex DVD Universal Remote Codes? Are you searching for Memorex DVD Universal Remote Codes? The Memorex DVD player remote may be used using a universal remote control; the required Memorex TV remote codes are 4 and 5. These remote codes simply work with all SAT and CABLE remotes as well as a universal remote control. Yet, if you use the right programming method, you can use it easily.

In order to program your DVD player with your selected universal remote control, we have all different kinds of codes and programming methods below.

Tips for getting the remote code of your DVD player

Memorex DVD Universal Remote Codes

Are you having problems finding the DVD player’s remote code? To get the remote code to manage operations remotely, follow these simple steps by yourself.

  • Turn on the DVD player.
  • Then, using a remote, press the “AUX,” “DVD,” or “TV” buttons.
  • from the pop-up box’s selection that appeared. Upon pressing the “RCU SETUP” button, the appliance starts to blink.
  • Use a numeric keypad to simultaneously click “9,” “9,” and “0.”
  • After pressing the buttons, you will observe that the DVD button begins to flicker.
  • Click on “1” on the numeric keypad to obtain the first digit of the code, and then take note of how often the buttons blink.

Memorex DVD Universal Remote 4 Digit Codes

  • 2003
  • 2424
  • 0722
  • 1297
  • 3349

Memorex DVD Universal Remote 5 Digit Codes

  • 31270
  • 32213
  • 20695
  • 20831
  • 21270
  • 30695
  • 30831

RCA Universal Remote Codes for Memorex DVD players

  • 3391
  • 3384

One-For-All Universal Remote Codes for Memorex DVD players

  • 0797
  • 0854

GE Universal Remote Codes for Memorex DVD players

  • 0446
  • 0394

Philips Universal Remote Codes for Memorex DVD players

  • 1413
  • 1913
  • 0246
  • 1606

How to Program Memorex DVD Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to determine the right remote code that works with your remote. Follow the instructions below:

  • Turn on the smart device you want to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is ready to program, according to the LED light.
  • Use the remote to choose the “CH+” and “CH-“ switches. 
  • On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device is.
  • Click the “power” key to confirm the code. It should start up. If it does, check a different channel to make sure the remote is programmed properly.
  • To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was saved.

How to Program Memorex DVD Universal Remote With Manual Method

The universal remote may be easily programmed using the keycode, which also helps to identify the manufacturer and model of your equipment.

  • You must first “Turn The Device On.”
  • On your “Memorex DVD universal remote,” choose “TV.”
  • In order to put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  • At last, key in the “Keycode” you collected from the programming manual (Instructions Booklet)
  • Just “point your remote at the TV” after completing this step, and then “Press and Hold The Power” button.
  • When the screen switches off, you can release the “Power Button.”

That’s all there is to it; your TV should now work properly with the universal remote control. If not, try repeating the process with a new code from the same section of the reference table.

You can put your universal remote to search mode and look for the right key code if you are unable to find it at that moment. The remote control is forced into search mode by a code in the instructions.

  • “Turn The Gadget On”.
  • Hold down the “Setup” button for a moment.
  • Type the “9-9-1” (three-digit) code after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”

Finding your key code may require some extra effort using the above method, but it is very important. Your remote should function properly for all in-room functions once you have completed the above steps.


You may control all of your TV or DVD activities remotely using the universal remote code by utilizing the aforementioned 3, 4, or 5-digit remote code. You can choose the other remote code from the same category if the first code doesn’t function with your equipment. For later use, be sure to save the code in your device’s settings.


How can I find the DVD player’s code?

Take note of the number next to the Region Code at the bottom of the DVD Status menu. (Note: The region code of your DVD player, not the DVD that is inserted, is represented by this number.)

How do I program my Memorex universal remote?

coding for the VR4
Activate the device Key (TV, VCR, or CBL).
To start a program, use the PROG key.
Using the numbered keys on the remote, enter the initial two-digit code for the chosen device. (… Point the remote at the appliance and hit the POWER button to test the code’s functionality.

Leave a Comment