Sansui DVD Player Universal Remote Codes

Hello, dear readers! Welcome to our blog, where we aim to enhance your home entertainment experience with the ultimate convenience and control. If you own a Sansui DVD player and have been looking for the perfect universal remote codes to unlock its full potential, you’ve come to the right place. In this post, we will delve into the world of Sansui DVD player remote codes and walk you through the simple steps to program your universal remote for seamless interaction with your devices.

From Sansui DVD players to other essential components of your entertainment setup, we’ve got you covered. So, sit back, relax, and get ready to unleash the full power of your home entertainment system with these comprehensive instructions and codes. Let’s dive in and make your movie nights even more enjoyable!

Sansui DVD Player Universal Remote Codes

Sansui DVD Player Universal Remote Codes
Sansui DVD Player Universal Remote Codes

We have the entire list of all the codes for the Sansui DVD player and other home entertainment devices. All you need to do to program a Sansui DVD remote is choose the type of device you want to use. The preferred device will match the list of codes we have. Find the perfect code for your Sansui DVD player and other required devices:

Read Also: GE Universal Remote CL5 Codes For Element TV

Sansui DVD Player Universal Remote 4 Digit Codes

  • 0394
  • 0967

Sansui DVD Player Universal Remote 3 Digit Codes


Sansui DVD Player Universal Remote 5 Digit Codes


How to Program Sansui DVD Universal Remote

It is very easy to program the Sansui DVD universal remote. The programming will never be as promising as it will be with the help of the instructions and the special codes. Set up enough time for this as there are times when one code won’t function during the procedure.

The setup instructions for the Sansui DVD remote are as follows:

Sansui DVD Universal Remote Without Codes

All universal remote control codes are scanned in the remote during the auto-search procedure. To program the control, it scans one code at a time to find the right remote code that works with your remote. Follow the instructions below:

  • “Turn on” the smart device you want to use the universal remote to control, such as the TV.
  • To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for 3 seconds. The device is ready to program, according to the LED light.
  • Use the remote to choose the “CH+” and “CH-“ switches.
  • On/off signals are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
  • Click the “power” key to confirm the code. It should start up. If it does, check a different channel to make sure the remote is programmed properly.
  • To save the code, press the “device” button now. The device’s LED will flash twice to verify the code that was saved.

Sansui DVD Universal Remote With Manual Method

The universal remote may be easily programmed by using the keycode, which also helps to identify the make and model of your device.

  • You must first “Turn The Device On.”
  • On your Sansui DVD universal remote, choose “TV.”
  • To put the universal remote in “learning mode,” press and hold the “Setup button” until it flashes a light.
  • At last, key in the “Keycode” you collected from the programming manual (Instructions Booklet)
  • Just “point your remote at the TV” after completing this procedure, and then “Press and Hold The Power” button.
  • When the screen switches off, you can release the “Power Button.”

That’s all there is to it; your TV should work perfectly with the universal remote control. If not, try repeating the process with a new code from the same part of the reference table.

You can put your universal remote to search mode and search for the right key code if you are unable to find it at that moment. The remote control is forced into search mode by a code in the instructions.

  • First of all “Turn The Device On”
  • Hold down the “Setup” button for a moment.
  • Enter the “9-9-1” (three-digit) code.
  • As soon as the device, in this case, your TV, “Turns Off,” press and hold the “Power Button” on the remote control.

Finding your key code may require some extra effort using the above method, but it is very important. Your remote should function properly for all the functions once you have completed the above steps.

Troubleshooting Tips

Troubleshooting Tips for Sansui DVD Player Universal Remote Codes:

  1. Double Check the Remote Code: If your universal remote isn’t working with your Sansui DVD player, the first step is to ensure that you’ve entered the correct remote code. Refer to the user manual or the manufacturer’s website for the specific code associated with your DVD player model. Sometimes, a small mistake in entering the code can lead to compatibility issues.
  2. Verify Remote Batteries: It may seem obvious, but often overlooked, ensure that your universal remote has fresh and correctly inserted batteries. Weak batteries can cause intermittent signal transmission, leading to unresponsiveness.
  3. Check Line of Sight: Ensure there are no obstacles between the remote and the DVD player’s sensor. The infrared signals from the remote need a clear line of sight to work effectively. Remove any obstructions and try again.
  4. Clean the Remote: Dust and grime can accumulate on the remote’s infrared transmitter or receiver, hindering the signal’s effectiveness. Gently clean the remote’s surface and the DVD player’s sensor using a soft cloth.
  5. Reset the Remote: If you have tried various codes and nothing seems to work, try resetting your universal remote to its factory default settings. Refer to the user manual for instructions on how to perform a reset.
  6. Ensure Compatibility: While most universal remotes are designed to work with various devices, it’s crucial to confirm that your remote is compatible with your Sansui DVD player model. Check the remote’s documentation for a list of compatible devices.
  7. Try Auto-Programming: Many universal remotes have an auto-programming feature that can search for the correct code automatically. Refer to your remote’s user manual for instructions on how to initiate the auto-programming process.


Are you now enjoying your home entertainment system and can control multiple devices with your Sansui DVD remote? If you have successfully set up your remote, would you please let us know what code you used and which device it matched? Please let us know your thoughts on this piece in the comments section.


Where can I find the remote code for my Sansui DVD player?

You can find the remote code in your universal remote’s user manual or on the manufacturer’s website. Look for the code associated with your specific Sansui DVD player model.

My universal remote isn’t working with the DVD player. What should I do?

First, double-check that you’ve entered the correct remote code. Ensure the remote has fresh batteries, and there are no obstacles blocking the line of sight between the remote and DVD player sensor. Clean the remote and DVD player’s sensor, if necessary.

Leave a Comment